Singer 5050 Mechanical Sewing Machine "slide plate" Questions

...slide plate on my Singer 416? I removed the slide plate on my Singer 416 to loosen the bobbin tension. Now I can't figure out how to replace the slide plate. Can you help? Lift the sewing machine ...

slide plate. How can I reinstall it? This can happen easily on older machines if you pull out the slide plate a little too far. If the bottom of the slide plate has a flat spring that should have keep

...slide plate on a singer 6234 1st. remove the foot from the machine to give you working room. 2nd. get the long plate "throat plate" look at the under side, you will see 1 side the slide part crimp ...

my slide plate is too loose how do i tighten it? the slide plate keeps opening when i am sewing most from underneath the plate. take plate off, tighten screw, replace

...slide plate and reinstall it? Proper way to take off slide plate that is over bobbin case and then put it back on. For most machines, this is just a matter of opening it about 3/4 of the way then ...

cant slide the needle plate setting knob over for rolled hem trying to do a rolled hem on janome mylock 744d , needle plate knob wont slide forward Does it have another plate for rolled hems?

...the called in the manual "free arm cover" Now can't get the metal plate to slide into the machine... Slides from left to right... But only slides in 2/3 of way Which metal plate are you referring

...to sew adn the bobbin will refill. make sure not to go past the outer white line on the bobbin case. good luck. the target button will go back to the original position when you slide the plate

...plate slide back up. I have removed as much lint as I can and removed the bobbin case to check under it. We really can't diagnose your problem without knowing the brand and model of your

...SLIDE PLATE ON SINGER 360 FASHION MATE Look carefully at your plate.. there should be some flat spring steel "wings" Tip your machine so you can get those wings under the metal of the slide