Singer 5050 Mechanical Sewing Machine "bobbin thread pulling" Questions

...bobbin thread Is the bobbin thread through the needle eye? If not then it needs to be there. The top thread doesn't pull it. when you fill the bobbin bobbin thread is through the needle then clipped ...

bobbin thread stitches get pulled up to top of fabric. How do I adjust tension to fix this problem? Bobbin thread showing on top side means the top thread tension is too high or there is too little or

bobbin thread, is it actually catching the bobbin thread? If not, then the machine may be out of time. Search for sewing machine timing or take it for service. If it catches the bobbin thread but then

bobbin thread tangling under fabric while stitching. Seems like it's not releasing from the bobbin. Check bottom thread (bobbin) tension. Pinch bottom thread (bobbin) between finger and thumb and make

...thread the bobbin on a singer simple sewing machine how to thread the bobbin Drop-in bobbin: Note: thread must change direction when entering bobbin shuttle notch. Usually bobbin will turn ...

...discs and pull the thread towards the back of the machine. Hold the thread end and turn the handwheel towards you to take up the bobbin thread. Close the bobbin cover and you're ready to start

...bobbin thread up? Simply hold the thread tail from the top thread and gently handrotate the handwheel toward you. One full circle completes one stitch cycle. The upper thread should hook the bobbin ...

...thread the bobbin through the bottom Hello: Thread the top thread and needle. Grasp that thread then use the hand wheel one entire rotation. Pull the top thread and you'll see the bobbin thread come ...

bobbin thread i have a e-10 huskystar and i can not get the bobbing thread to connect with the needle thread, help Sounds like hook/needle timing is off. Check it by doing the following with the power

...bobbin has thread, needle is threaded, can bring bobbin thread up but they are not connecting! I run machine "sewing" but no thread is sewn in material Check bobbin thread....Insert the ...