...saw what I do is; Remove the spark plug Pour about 5ml (one teaspoonful) of fuel into the opening Wet the electrode end of the spark plug (The spark gap) with fuel Replace the plug and try to start ...
saw has spark ... so put in new plug and start fresh. If your saw has compression, spark, and fuel it should start unless carburetor is gummed up because gas was left in tank. Here is the final trick.
spark plug gap for a homelite chain saw model super 2 16in 40 cc hi kathy. this is an easy one. first of all you will need a spark plug gapping tool, about a dollar at any auto parts store. Your chain
saw when cold and work it hard. if it stalls or quits remove spark plug and hook the plug wire to the plug and ground to the cyl head have switch on and pull the start rop briskly a few times or use a
mixture of gas/oil ratio in saw then >>With trigger depressed fully and choke on, pull until it fires and then shove the choke in. /////If no spark and the saw is new, I would return to retailer
...spark. saw sat for three Mac 16" chainsaw. no spark. saw sat for three years. would only start if fuel poured down choke. bulb was cracked and fuel lines eaten away. replaced and fuel now can be ...
...saw has no spark how to fix Not being facetious here... change the spark plug as a first step. They require regular replacement. If that doesn't work, use a multimeter to check that the spark plug ...
Saw I need to change the spark plug on my Eager ****** Petrol Chain Saw but cannot figure out how to get the current spark plug our. It it covered by the housing of the chain saw and there appearrs to
spark plug from the saw. If you want to check that it's sparking push the plug back into the HT lead, Rest the spark end against a metal part of the saw and pull the start cord. Check that the plug is
153 questions posted
Usually answered in minutes!
529 Questions
514 Questions
473 Questions
353 Questions
122 Questions