Motorcycles Logo

Related Topics:

U
Uriol Baatjies Posted on Aug 09, 2016
Be the first to answer

I own a Yamaha FZR1000 3GM. Does a more current Yamaha engine fit in the chassis without modification.

Answer This Question

2 Related Answers

Anonymous

  • 408 Answers
  • Posted on Feb 06, 2012

SOURCE: will a 2001 r1 engine fit a 1999 r1

If the 2001 is with carburetor it is basically the same engine. But that year changed to the fuel injected engine which is a pain to fit.

Ad

woodhenge

  • 57 Answers
  • Posted on Sep 17, 2014

SOURCE: Is it possible in the frame of Yamaha xv 750 from 1981 engine of 1987 Yamaha xj 750 maxim to be fitted without major modifications? And if other parts such as wheels, fork, tank can also be fitted wit

Depends what you call major modifications. You are certainly going to need some high grade cutting and welding. Many would regard those as major modifications. Some would not! Additionally some basic research as to the length and diameter of the fork tubes will tell you a lot. I assume that you have worked out whether the length and alignment of the drive shaft is the same.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I have a 2004 S10 crew cab 4x4 needs a transmission I was told I have to use an 04 trans is this true or can I use another?
Stick to a 2004 Transmission. Transmissions are built to go with specific engines from specific vehicles. This means the bolt holes to fasten it to the engine and the chassis can be in completely different positions between engine set ups. This makes it almost impossible to fit without Serious modification. Another factor to think about is that a 2 wheel drive Trans will be different to a 4 wheel drive Trans.
Read full answer
Oct 23, 2020 • Cars & Trucks
0helpful
1answer

Is it possible in the frame of Yamaha xv 750 from 1981 engine of 1987 Yamaha xj 750 maxim to be fitted without major modifications? And if other parts such as wheels, fork, tank can also be fitted wit
Very difficult to produce. The two frames is different.First one in Virago XV750 is open in front,second one is with closed frame on Yamaha XJ750.
Read full answer
Sep 17, 2014 • 1986 Yamaha XJ 700 S Maxim
0helpful
1answer

Is it possible in the frame of Yamaha xv 750 from 1981 engine of 1987 Yamaha xj 750 maxim to be fitted without major modifications? And if other parts such as wheels, fork, tank can also be fitted without...
Depends what you call major modifications. You are certainly going to need some high grade cutting and welding. Many would regard those as major modifications. Some would not! Additionally some basic research as to the length and diameter of the fork tubes will tell you a lot. I assume that you have worked out whether the length and alignment of the drive shaft is the same.
Read full answer
Sep 17, 2014 • 1986 Yamaha XJ 700 X Maxim
0helpful
1answer

Will a 1990 ford ranger engine fit 1990 Mazda B 2200 truck without any modifications?
No it will not. Only a comparable engine from another mazda b2200 truck and I think the b2000 and possibly Miata, 2.2 engines were about the same from 1986-1993. You can pretty much count out just dropping in a motor from a different manufacturer for any make. Fords don't fit chevys, etc. etc., This would require you modify the entire drive train and quite possibly the electrical system, cooling system,etc. Definitely not worth the hassle involved.
Read full answer
Jul 22, 2014 • 1990 Mazda B-Series
0helpful
1answer

How to fit a towbar to a nissan luarel 1998
As the fitment of tow bars to vehicles requires a modification plate to be added to the vehicle this is a job best left to the shop doing the job. Nissan currently have chassis/body failure from incorrect tow bars and incorrect fitting procedures. If the bars are fitted by anyone not qualified to do so and the bars are not certified then the owner faces criminal charges in the event of the bar failing and causing damage.
Read full answer
Aug 03, 2013 • Cars & Trucks
0helpful
1answer

I have a 2005 model Quinny Buzz and tried my chassis with a newer model frame. The only difference in seat frame to chassi conection is the format on the tip of the pole that ataches to the chassis. Mine...
Hi

This is not recommended as modification of your Quinny could make the product unsafe to use.

From what you are saying you are trying to use the original 2005 style chassis with a newer model sub seat (seat frame) is this correct?

If so there are rubber bungs on either prong on the sub seat that can be removed in order for this model sub seat to fit in the 2005 chassis. If you'd like more information on doing that please pass on an e-mail address and we can put you in touch with an engineer to discuss.
Read full answer
Mar 23, 2013 • Quinny Buzz Baby Gear
0helpful
1answer

Will a 2001 r1 engine fit a 1999 r1
If the 2001 is with carburetor it is basically the same engine. But that year changed to the fuel injected engine which is a pain to fit.
Read full answer
Feb 06, 2012 • Motorcycles
0helpful
1answer

Will 3ln pistons fit a 2kr?
No you can fit 3ln pistion to a 2kr without extensive modification. Sorry the piston pin height is different'
This is to allow for the changes yamaha made in the rod length
82mm 3ln .
80mm 2kr .
Hope this helps
Read full answer
Aug 04, 2010 • 1987 Yamaha FZR 250
0helpful
1answer

Best motherboard that will fit the case of my Dell 8200 PC. I want more ram and maybe upgrade the processor.
The best MB for that chassis that will fit without any Modification is a Dimension 8400/PWS370 Dell Motherboard. The chassis power button/USB connection is a proprietary Dell connector and using any 3rd party MB will require modification and the wiring is almost impossible to find for that control board.

For just about the same cost (MB, Processor, Heatsink/Fan and RAM) you can buy a New Vostro 220 with a Core 2 Duo processor w/3GB RAM and a 320 GB HDD and it is under warranty
Read full answer
Dec 30, 2009 • Dell Dimension 8200 PC Desktop
0helpful
1answer

Will 2000 r1 engine fit into a 1998 r1
easy! my r1 98 fit with 03 engine! do some modification, ok :)
Read full answer
Apr 16, 2009 • 1998 Yamaha YZF-R1
Not finding what you are looking for?

View Most Popular

Motorcycles

Related Question

I have a 2004 S10 crew cab 4x4 needs a transmission I was told I have to use an 04 trans is this true or can I use another?

  • Cars & Trucks

75 views

Ask a Question

Usually answered in minutes!

Popular Questions

How to cheack the oil

1990 Yamaha FZR 1000

Oil change on my 1990 fzr yamaha 1000

1990 Yamaha FZR 1000

89 fzr 1000 fuel pump problem

1989 Yamaha FZR 1000

Can you bypass the fuel pump so the carbs are gravity feed

1989 Yamaha FZR 1000

Yamaha FZR1000 exup genesis. Hi there, I was

1987 Yamaha FZR 1000

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
FZR1000_90-Assembly_Manual.pdf....

1990 Yamaha FZR 1000

PDF Manual
FZR1000_87_2GH_Service...

1987 Yamaha FZR 1000

Loading...