I'm having excatly same problem, found this sequence to ge the car running again..turn off ign, unplug cam position sensor, crank for 2 seconds, connect cam shaft sensor, crank again and it starts like that...
Even better... I'd found root cause.. problem is There is a sharp edge AT engine Head corner, this cause a short circuit AT main cables harness by damaging insulation and creating a ground On this area, ,,I'd put some insulation tape at damaged cable and put small square piece cutted a scsrap milk plastic bottleto prevent new damage...problem was solved forever.
×
852 views
Usually answered in minutes!
×