At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like you blew a fuse. The fuse for the radio and ACC which I believe would be the lighters as well is located in the interior fuse panel (see picture of location below) and will be the fuse in the number 4 position (see 2nd picture below of diagram of layout). Now I hope you have the security code for the radio that should have come with the vehicle because you will need to enter it in order to get the radio to work again as it will be locked until you do. On Honda/Acura if you begin to enter the code and you start to enter it wrong continue with a code anyhow because you can't go back. You have 3 trys. If you mess up 3 trys in a row, the radio will be locked for 1 hour and then you can try it again. I hope this helps and good luck.
IT is a "Time for Service Code"
B2 Means its time for an oil change, Tire rotation, Cabin filter replacement and air filter replacements. Call your dealer or local Acura rep for an appointment.
Hope this helps.
Check the fuse for your blower motor if it is OK the Blower Motor may be bad or you may have a loose wire to or from the it have it checked if fuse is good
The SRS computer needs to be reset, if you dont have a repair manual i would first suggest finding one for each car. The basic principal is that you jumper the diagnostic plug (under the glove box in the RL). The next step I believe is that you must depress the TCS button, then while holding it down you turn the key to on, continue to hold the TCS button for 15 sec and then let off. The check engine light should then blink really quick a few times and that means its reset. Im reciting this from memory so dont quote me on it. I have done it before for the RL but not the integra, id really suggest finding a repair manual though.
×