I have had the same problem. Actually, my Heads up and my control panel are not working. I have been told might be a fuse or a relay I believe the fuse numbers are interior is like 26 and 29. Underhood also there are fuses and a relay I believe is 41. Go to aztek fan club and they have a copy of the Manual if you dont have one. Check the fuses. If this is not it ...it can be a loose connection which I am having checked out. Been told it has to do with the relay.
I have had the same problem. Actually, my Heads up and my control
panel are not working. I have been told might be a fuse or a
relay I believe the fuse numbers are interior is like 26 and 29.
Underhood also there are fuses and a relay I believe is 41. Go to
aztek fan club and they have a copy of the Manual if you dont have
one. Check the fuses. If this is not it ...it can be a
loose connection which I am having checked out. Been told it has
to do with the relay.
Yes and no. it may that the button is broken or the conection is bad, or it just might need an entire new system. you might want to get all of those things checked out
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like one of the blend doors stuck and-or the actuator motor broke. The blend doors direct air flow thru the heater core and the evaporator as well as out the vents. They are controlled by small electric motors.
Check for power and ground at the blower motor electrical connector. If both power and ground are present, replace the blower motor. If power is not present, you may have a blown fuse, in which case your motor is very likely to be shorted and therefore, the cause of the blown fuse. If there is power but no ground, The most likely cause would be a burned blower motor resistor. (Ground is supplied through the blower control switch to the resistor, then to the blower.)
Fuses may be okay but there are wires and switches that control the settings(like a dimmer switch)
Basically needs more troubleshooting I wouldn't want to throw out parts at you without troubleshooting.
A diagram would be a great help.
how do i fix my ac/ heater they both wont work not even defrost it use to work only on selection number 5 now it dont work at all we just put a new blower in it today and it still wont come on
the blower not working on settings 1-3 is the blower motor resistor. this limits the power provided to the blower motor itself to change the speed. at setting 4 it is getting full power. since it quit on 4 also, i would still say the resistor needs to be replaced first, then see if the blower comes back. you may also need a blower motor. if you have a voltmeter you can just turn the switch to 4 and see if the motor is still getting 12 volts. if it is and doesn't run, it needs a blower motor too. if it's not, then its just the resistor
Are you saying the blower motor isnt working? Does the heat blow? If it doesnt replace the blower motor. If car isnt making cold air you can charge it yourself or go to auto zone the should do it for you. Check ac belt.
check to see if you have power at the AC AND HEAT blower motor.if yes your blower motor is defective.if you have no power to blower motor look at fuse- blower relay-resistor or bad control switch.
The radio light is a small bulbinside the radio, pull the radio out, remove the top cover from the radio chassis and the bulb is right there, most parts stores carry this little peanut bulb
I have had the same problem. Actually, my Heads up and my control
panel are not working. I have been told might be a fuse or a
relay I believe the fuse numbers are interior is like 26 and 29.
Underhood also there are fuses and a relay I believe is 41. Go to
aztek fan club and they have a copy of the Manual if you dont have
one. Check the fuses. If this is not it ...it can be a
loose connection which I am having checked out. Been told it has
to do with the relay.
[email protected]
×