I am leaving old line in there. just cutting the ends off. Run a new line where I want it.
SOURCE: I need a brake line diagram for a 1997 Ford
Try to get the service manual from Ford for your vehicle. Many times Haynes and Chilton won't publish it, because there is a certain flexibility in the way lines can be routed, underneath the vehicle in question.
The brakes may cross over left front to right rear and right front to left rear as far as being connected in circuits by the master cylinder.
Some GM trucks use a front to back system where the two front wheels are on a circuit and the two back wheels are on a circuit, but this is antiquated.
Actually, if you follow the routing of the brakes the way I described, you'll be able to put new lines on by copying what was there in the first place, assuming nobody has disassembled it since it was at the factory or what not.
Hope this helps.
SOURCE: where is the fuel filter on a 1997 grand cherokee?
should be in front of fuel tank just above the rear axel
SOURCE: rusted engine block
LOL no its completely natural its just the paint on the cast block was crappy. I have a 08 wranler and its rusting everywhere. best of luck
SOURCE: I have a 95 wrangler
it's called a cross member and doesn't have a real aprt number that i'm aware of. in order to remove it you have to grind off the rivots and punch them out. you generally can find a suitable replace ment at a salvage yard for alot less money. you can also go to a dealership and they have a blow up diagram and you can show them the part and they can order it for you depending on if it's still available.. please rate this
SOURCE: tail light wiring connectors and wiring diagram
A test light checking each connector would be faster and easier to do. Maybe somebody may have a illustration for you but by far a simple test light is all you need with a helper turning on the different lights as you check them out and writing all your findings down
2,698 views
Usually answered in minutes!
×