There isn't much difference between them. The SL series didn't change between 95 and 96 except for the ecm is OBD2 on the 96. Are both cars stick shift? The difference in the SL1 and the SL2 are the cams. 1 for sohc and 2 for dohc. So what you are asking is can I take out my dohc motor and install a sohc motor right?
Yes there are computer differences. Anything can be done with enough time and effort, and this can be done. If you don't mind me asking, why do you want to do this? Is the 1995 blown up? Does the 96 run and move or is it wrecked?
The problem is you will not only be switching the motor and trans, you will need to switch computers, wiring harness, shifter, dash panels, pedals, cables, clutch master, clutch slave, drive shafts and a few other parts. It's a lot of work, and it will take some time. I hope you still have the wrecked car for parts.
It would be less work if you didn't change the engine and the dual cam engine will run better.
×
220 views
Usually answered in minutes!
The 95 LS-2 HAS A AUTO TRANSMISSION. IS THERE GOING TO BE A COMPUTER DIFFERENCE OR CHANGE?
AND YES , I WANT TO SWAP OUT THE TWO MOTORS AND TRANNYS
THE TRANNY IS OUT ON THE LS-2 AND THE 96 LS-2 HAD MAJOR REAR END DAMAGE. SO WE PULLED THE MOTOR AND TRANNY. SO I THOUGHT I WOULD SWAP OUT THE MOTORS AND TRNNYS. I FIGURED SINCE THE MOTOR AND TRANNY ON THE 96 ARE IN ONE PIECE IT WOULD BE EASIEST TO JUST SWAP THE MOTOR AND TRANNYS. INSTEAD OF CHANGING TRANNYS WITH THE MOTORS.
I WOULD ANYWAY IF I JUST SWAPPED OUT THE TRANSMISSIONS.
×