You are incorrect. on a 91 jeep cherokee the belt is adjusted pivoting the power steering pump assembly. loosen the top bolt on the PS bracket, the 2 bolts on the back of it, and the bolt holding the adjustment bolt tight (the long bolt threaded into the bracket under the pump on the drivers side. turn the long bolt (adjustment bolt) to tighten or loosen the bolt.
gah, typos ;) i mean turn the adjusting bolt to tighten or loosen the BELT. doh!
more information about your Jeep Cherokee can be found in the tech forums at NAXJA, a club for cherokee owners. google the name, you'll find it.
You missed a bolt to loosen. I loosened what you said. P/S pump wasn't loose. Two bolts front. One you can see ontop of the P/S pulley. The other,you can't see is under the pulley,slightly to the left. Both are 13mm. I'm a 1991 jeep cherokee 4x4 owner. [email protected]
×
Look at the top of the pulley mount there is a bolt , loosen the bolt on the pulley slightly than use the bolt at the top to raise or lower the pulley tighten the bolt on the pulley when your done
1,402 views
Usually answered in minutes!
×