Questions & Answers for: loose belt

Question about U6630-900 WindTunnel Bagless Upright Vacuum

4 Answers

...loose! V-belt suppose to be loose (according the manual). I just replaces it (and was worry that it is loose), but brush rotating fine. So your problem is somewhere else. Please confirm the ...

Ad

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

...LOOSE BELT. THE BELT IS STILL LOOSE EVEN AFTER REPLACING Hoover U6437-900 U6439-900 Upright LOOSE BELT. THE BELT IS STILL LOOSE EVEN AFTER REPLACING I would advise you to ALWAYS to FIRST UNPLUG YOUR ...

Ad

Question about U6630-900 WindTunnel Bagless Upright Vacuum

1 Answer

...Belt loose and bar won't turn I also replaced the belts and bar stil won't turn due to loose drive belt. There appears to be no adjustment to tighten the belt. I'm considering cutting the belt and ...

...RX 300? loose bolt A (but don't remove) and turn bolt B anticlockwise till ur belt loose if its not loosing the belt bolt B will come out then pull the belt up and down then remove and fix the ...

Question about 1999 RX 300

1 Answer

...loose belt or bad bearing in a pulley. If the squeal gets louder if you spray water in the area of the pulley it is most likely a loose belt. I would start by looking at the belt itself first then ...

Question about 2002 Escort

2 Answers

...belt is loose You'll need to replace the belt tensioner as it is probably weak and not keeping the correct tension on the belt. Replace the belt - a loose belt won't spin alternator fast enough to ...

...belt loose on pontiac se grand am serpentine belt is loose how to tighten it The belt has an automatic tensioner pulley and no other adjustment is needed or provided for.  If the belt is to ...

...bit horse XpressMusic 46" tractor Belt is too loose, bearings were replaced and now belt is loose the belt has to be loose in the disengaged position Lisa. it will tighten up in the engaged

...belt is to loose tells me the belt wasn't put back on correctly. replacing the bearings don't have anything to do with the adjustment of the belt. double check to be sure is is on right Lisa. ...

...loose belt: A misaligned belt or a belt that is too loose can cause it to come off. Improper belt size or type: Using an incorrect size or type of belt can cause it to slip or come off. Engine ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...