Really tough to do on the net but first we need to know about any codes...
Hold speed control OFF button, and turn ignition switch to RUN position. CRUISE indicator should flash once to indicate successful entry into self-diagnostic mode. If CRUISE indicator does not flash, start procedure over. If CRUISE indicator still does not flash, repair system by symptom there might be some switch concern
If CRUISE CONTROL indicator flashes once followed by 5 additional flashes, replace speed control servo/actuator.
Release speed control OFF button. Within 5 seconds in entering self-diagnostics, press speed control ON button. Press remaining speed control buttons in the following sequence; ON, RES, COAST and SET/ACCEL.
As each button is pressed, CRUISE indicator will flash.
Wait until indicator light goes out, then press next button. After sequence has been completed, indicator light will flash to indicate test passed or failed. With the codes we can then better diagnose your concern
Immediately after static test has passed, actuator performs a dynamic test by automatically operating throttle .04-.40" (1-10 mm). Observe throttle movement to witness any sticking in cable or linkage. Ensure throttle returns properly. Turn ignition switch to LOCK position. If self-diagnostics do not pinpoint fault there is more we can do but tough over the net
This was great! I was trying to figure out how to fix my cruise control, and this confirmed what I was afraid of. I held OFF while turning on the truck... flash. Hit ON... flash. Hit the buttons on the right side of the steering wheel... nothing. Guess I'm off to see if this is something I can replace myself or not... the airbag is holding me back from taking out the screws on the steering wheel to get in there.
Did all the the button tests above and all switches made the Cruise indicator light up once, except the last SET/ACCEL switch .Only after a second the Cruise flashed 3 times. What dose this mean?
I got the first flash, but did not get a flash when the on button was push. what does this mean? thank you
×
On
this case, to troubleshoot this problem, there are solved help links. Click the
link directly and refer the details to solve this problem yourself, with help
of diagrams: ------
-----------
http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working.html
--------
Horn
and cruise control not working on Plymouth Grand Voyager?
http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-not-working-on.html
------------------
http://howtobyme.blogspot.com/2011/11/horn-and-cruise-control-quit-working-on.html
-------------
http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html
----------
http://technoanswers.blogspot.in/2012/02/cruise-control-stop-working-on-1994.html
----------
http://schematicsdiagram.blogspot.com/2011/12/cruise-control-not-working.html
--------------
----------
These
will help.
Thanks.
5,342 views
Usually answered in minutes!
×