My car makes a loud rumbling noise when i accelerate and gets louder as i go faster, if i turn my wheel slightly to the left all the noise and vibration stops and it sounds normal again

if hub bearing replacement did not fix the noise

when noises are on left and right turns
that has CV joints /drive shafts
would say they are the issue
replace both sides

and replace the left hand hub bearing at the same time

IT is either a bearing or a CV joint.

One wheel turning faster than the other is normal if both wheels are off the ground. If one wheel is dragging when the other wheel is on the ground, it could be brakes or a wheel hub bearing.
Usually if the noise happens on right turns, the left hub bearing is failing, and vice versa.

It is probably your wheel bearings. Although, it is possible that your CV Axle could be damaged.

sounds like the wheels are out of balance, is there a slight vibration through the steering wheel at this speed? and does the problem stop if you go faster (please drive carefully)

cv axle..replace them both

Sounds like a wheel bearing.

If you jack up each wheel in turn and spin the wheel (make sure the parking brake is off and transmission is in neutral) the offending bearing will produce the rumbling noise.

you may have wheel bearn going. they will make noise grinding when you trun

If the sound is all the time, no matter what you are doing then it is the Transmission going bad. CV Joints, Wheel bearing will only make the noise when in rotation.. Also remember that this is a front wheel drive car, so it will throw you off thinking it is the wheel bearings or CV joints due to the front wheel drive

You probably have a bad wheel bearing or bad tire on left front. when making right turn left front wheel wil spin faster than right making noise louder.