Out of stock at dealers and none available on internet read Bob's where common problem. Shims 31miNS. None of old fit specs. To get the average clearance I need 1-2.01 1-2.09, 1-2.10, 1 2.11, 4-2.13, 4 2.15, 1 2.16, 1 2.19, and 2.21. I have old shims. They do have some high spots
Hi, Tina.
What I would do is take the shims you have to a good machine shop and see if they can skim the surfaces down to the correct thickness. Other than that, maybe you can find shims from a different vehicle that will fit yours.
Good luck
SOURCE: Starter or solinoid?
I never heard of a starter solonoid coming with shims. Did you replace the starter or starter solonoid?
What engine do you have?
SOURCE: 1997 nissan pickup 4wd, just had timing chain
Not likely. You have a 4 cyl engine with over head cam. It has hydrolic lifters. If it wasn't making the noise before he replaced the chain, then its something he did...or didn't do. If it was making the noise before, most common reason would be 1 or more lifters not pumping up. If you have a six cyl, no one changed the timing chain, (It doesn't have one!) The 3.0 6cyl has a belt.
SOURCE: Need valve cover torque specs for 2002 Kia Spectra
The torque specs for a Kia 1.8 valve cover is 43-78 inch pounds...... Basically just snug....
thew timing marks for vanette cargo are on the timing belt u carnt go wrong
48 views
Usually answered in minutes!
×