Transmision wont go in R,2,4 but 1&3 is fine 97 hyundai tiburon
My experience is a faulty pin in the transmission, but yes, get the transmission repaired.
You need to have the transmission repaired. There is a faulty Solenoid inside the transmission.
Testimonial: "Thank you I apperitate your time"
Have it scanned. There isn't any solenoids inside the transmission on Hyundai's.
SOURCE: transmision wont go in R 2 4 but 1&3 is fine
If you have a manual transmission it sounds like you have broken or lost a clip or mount that holds you shift cable in position. You need to follow the shift cable from the trans to the place where it mounts to the trans and hook it back up. It should not be a bad transmission since you have all your upper gears on the tree (1&3) and have problems getting to the bottom gears (3,5,& R). I have seen this problem before so good luck. If you have an automatic transmission follow prior advice and run to the dealer.
313 views
Usually answered in minutes!
×