20 Most Recent Hyundai Motor 1999 Tiburon Questions & Answers

Measure the voltage going to and coming from the starter solenoid.

Hyundai Motor... | Answered on Feb 01, 2019

The flasher module is part of the BCM (body control module) module, that is part of the passenger compartment fuse box. See photo.

Hyundai Motor... | Answered on Jun 06, 2016

sounds like a bad connection or bad starter, when it runs it will heat up starter. when its cold the metal or bad connection will expand and contract. check main all connections going to starter

Hyundai Motor... | Answered on Sep 20, 2015

Do you have a decrease in power? Do you have water in oil? Do you have a increase in fuel and or oil usage. How much condensation comes from your exhaust. What type of car is it. Your local AutoZone can be very helpful in diagnosing this problem

Hyundai Motor... | Answered on Jun 07, 2015

You need to have the transmission repaired. There is a faulty Solenoid inside the transmission.

Hyundai Motor... | Answered on Apr 28, 2015

You would need to find out if it is a problem with the compressor or the blower motor. You could pull the compressor relay or unplug the compressor to find out.

Hyundai Motor... | Answered on Jul 27, 2013

weird but try this. at the top of you brake pedal you see a switch that the brake pedal touches when in the unpressed position see if that stopper you are talking about mounts on the pedal arm .

Hyundai Motor... | Answered on Jun 28, 2013

Find your fuse panel. There should be 2 round metal ones that look different from the regular fuses. These are your flashers. Most have 2. One is for your turning signals, the other is for your emergency flashers. If your turning signals are not working, then simply switch them. Now your signals should work fine. Then go to the store at your convenience to pick up a new one to replace the emergency flasher.

Hyundai Motor... | Answered on Jun 08, 2013

Valve body or torque converter is going bad. Also Some cars have a overdrive off button, make sure you did not hit it on accident

Hyundai Motor... | Answered on Mar 06, 2013

What have you checked so far ?
Is it getting spark to the plugs, compression, and fuel to the injectors ?

Hyundai Motor... | Answered on Dec 19, 2012

If you could post a copy of the report or type ALL the info from it i think we could help you get it fixed

Hyundai Motor... | Answered on Dec 11, 2012

You slip it in between the weather stripping and the window, with the angle of the Jim oriented toward the door lock. There are a series of rods that connect the inner and outer handles with the door lock, so you just have to push down, or maybe lift up and move it around until you find a rod. It will help you greatly if you can find online a picture of what the exploded view of your lock assembly looks like. Once you hook a rod or press on one, you'll just have to experiment until you pop it. Beware: Some newer cars have plates welded inside to prevent slim jims from working.

Hyundai Motor... | Answered on May 02, 2012

Not finding what you are looking for?
Hyundai Motor 1999 Tiburon Logo

105 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts


Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tiburon Hyundai

  • Tiburon Hyundai

Most Popular Question

flasher module located 1999 hyundai

  • Cars & Trucks