-
Cadillac Master
2,993 Answers
- Posted on Aug 25, 2009
Re: Fender bender, bought new assembly. How to remove old...
LIGHTING
Headlights
REMOVAL & INSTALLATION
- Unscrew the Torx retaining screws and remove the headlight bezel.
- Remove the headlight bulb retaining screws. These are the screws which hold the retaining ring for the bulb to the front of the car. Do not touch the two headlight aiming screws, at the top and the side of the retaining ring (these screws will have different heads), or the headlight aim will have to be re-adjusted.
- Pull the bulb and ring forward, then separate them. Unplug the electrical connector from the rear of the bulb.
- Plug the new bulb into the electrical connector. Install the bulb into the retaining ring and then install the ring and the bulb. Install the headlight beze
×