I'm changing blower motor resistor on 99 Plymouth breeze. Told it's behind the glove box. Having a problem removing the glove box tho. How do I remove it to get to the resistor ?

Marvin

• 85242 Answers
• Posted on Sep 16, 2008

SOURCE: blower motor speed

You will need to replace the blower motor speed control resistor.

SOURCE: blower motor speed

The resistor is under the dash on the passenger side. You'll have to remove the protective accessibility hatch first & it will be right underneath there. You'll probably need a 3/4 wrench to remove the 2 bolts that hold it in place. If you replace the resistor & it works for a while then burns out, then it's your blower motor drawing too much voltage & that may need be the next thing to replace so it's like catch 22.

SOURCE: how to replace blower motor resistor on 2000 grand caravan

there will be two 8mm screws holdin it in.. with two connectors into it

SOURCE: Air Conditioner blower motor resistor was replaced

Motor is also energized by a relay. check that and also check that the motor itself is good by running a hot lead right to it. I'm sure you already checked the fuse and know the switch is good?

SOURCE: 2001 Grand Prix: Is the blower motor resistor on a Pontiac 2001 Gra...

It is behind and underneath the glove box back by the firewall. No need to pull out the glovebox.You may need to pull the carpet back to get to one of the bolts.