Cars & Trucks Logo

Related Topics:

b
bruce Posted on Apr 27, 2016

02 ford escape very high idle

Very high idle, even when driving ,have replaced intake gasket ,iac tps ect, its like cruse control s on if you let coast it will go back normal,some kind of electrical problem opening the iac valve or something when temp goes up outside the worse its gets

1 Answer

matthew nulph

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Cheetah:

An expert who has answered 20 or more questions within one hour.

  • Contributor 49 Answers
  • Posted on Apr 28, 2016
matthew nulph
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Cheetah:

An expert who has answered 20 or more questions within one hour.

Joined: Jul 23, 2014
Answers
49
Questions
1
Helped
14822
Points
86

Try taking pff your throttle body and cleaning it and also check and see if your throttle cable is tight or try loosening it and see if the throttle drops. Could also be a bad o2 sensor staying in open circut

  • matthew nulph Apr 28, 2016

    Try taking pff your throttle body and cleaning it and also check and see if your throttle cable is tight or try loosening it and see if the throttle drops. Could also be a bad o2 sensor staying in open circut

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

03 ford escape idles at 1200rpm. cleaned iac replaced bank 2 sensor 1 o2 sensor vacuum lines plugs and intake gaskets cleaned tb iac . runs great 187,400. rpms drop to 850 when ac on. fluids good.

High idle is most often caused by an engine vacuum leak, use a can of carburetor spray and spray it around the intake manifolds (upper and lower), if there is a leak you will hear a change in the idle speed
0helpful
1answer

High idle 4000 rpms

Possibly a leaking injector or bad / stuck throttle position sensor.
0helpful
1answer

How to fix high idle have already Cleaned idle air control valve also Throttle body replaced all vacuum Lines and throttle body gasket.

Intake gaskets? IAC valve bad? MAR set too high? Computer failure? Wiring to IAC bad connections? TPS not set to spec?
0helpful
1answer

High idle on 86 Ford Bronco II (2.9L). Have replaced IAC, TPS and ECT. Also checked all vacuum lines. No fix. Need help.

I have heard of coolant sensors staying cold and keeping idle high but not a particular model.
0helpful
1answer

High idle

If you have the 5.0 liter engine or the 5.8 litre there was a problem with the upper intake manifold gasket being cracked and sucked into the intake causing a vacuum leak and the result was high idle. Also a leaking egr will sometimes cause high idle.
1helpful
1answer

Cop2004 ford escape idles rough.Has Code P2197Lean bank 2.4and6 Misfire at idle goes away at acceleration. We renewed upper and lower intake manifold gaskets and all kinds of hoses. Replaced the 02...

Bad injector ?? Bank 2

Air leaking around injector -driving O2 Lean

2197--trying to correct for over rich condition

Coil misfires

TPS Sensor

MAF ?

You need to take out fuel
at least at idle
1helpful
5answers

2001 FORD F250 5.4L HIGH IDLE PROBLEMS.CHANGED IAC AND STILL THE SAME

High idle
Changed IAC still the same, shown on scanner IAC 50-60 %, if it set to 40% the Idle is ok. What cause the PCM to set IAC too high? Is any one know?
6helpful
2answers

Saturn SL 2002 High Idle

Intake manifold gasket. Leaking where intake meets head.
Not finding what you are looking for?

232 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...