2001 Ford Focus Logo

Related Topics:

Posted on Jul 11, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Oily wet spark plugs on a ford ka 2001 recently had new ones fited.

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 4 Answers
  • Posted on Jul 13, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Jul 13, 2009
Answers
4
Questions
0
Helped
1800
Points
7

I have a 2001 focus and what happend to mine was the valve cover gasket was leaking on to the spark plug... was it just the plug or the boot as well.???

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Ford Master 6,982 Answers
  • Posted on Jul 11, 2009
Anonymous
Ford Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Nov 07, 2008
Answers
6982
Questions
0
Helped
2649947
Points
22782

Oil residue on plugs is never a good thing, usually indicating excessive ring wear or other major internal problem (read:expensive) But, first, check that any engine venting system (pcv, cover vent etc) is clear and not building crankcase pressure, then check compression or cylinder leakdown test. Also make sure that you do not have a problem in the fuel system that you are mistaking for oil on plugs.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Cyclinder 7 misfire

IT COULD BE A BAD WIRE OR A BAD SPARK PLUG TRY THIS FIRST PULL THE SPARK PLUG ON CYLINDER 7 AND SEE IF IT IS WET OR OILY IF THAT IS THE CASE PUT A SPARK PLUG EXTENDER ON THAT CYLENDER TO STOP THE OIL FROM REACHING THE PLUG
0helpful
2answers

2001 ford escape 3.0 engine no power in cylinders 4,5,and 6

wonder if it brings a check engine light on? check your coil packs spark plugs/wires - could be a bad injector - could be a vacuum leak - could be an intake leak causing anifreeze to be introduced into the combustion chamber - same with the head gasket could be blown causing the same effect as an intake gasket most of the time if you check your spark plug they will tell you everything like oil on them would be black and oily if its been introduced to water/anifreeze could show signs
0helpful
1answer

Ford ka roll top glove box

The small clips break on these Ford Ka roller glove boxes and the are only available from ford .
The old one can be taken out with a pliers.
The new part will simply slot into the small rectangulay hole and just clicks into place to fit.
Sometimes the get dislodged and stay attached to the small locking point on the lid.
0helpful
1answer

My ford ka has started to judder

It is probably ignition failure. Hard to diagnose with out witnessing it. I wud replace the wires to the spark plugs and the spark plugs themselves. If you take it to a service shop they will probably do that first and charge you more.

If you need further help, reach me via phone at https://www.6ya.com/expert/gary_9c859f4aa7e5ab10

0helpful
2answers

No,4 plug not fireing changed plug wires.new coil.plug ran good for 100 miles then 4 stop again

You would need to figure out if it is a problem inside the cylinder or with something like the crank-cam sensor firing the coil. I would change the plug again to see if it works for a few days.
Could be a problem with the fuel injector or a vac leak if the plug is firing but no power from that cylinder.
1helpful
1answer

My car exhaust smokes what is the cause

usually this happens due to engine wear off
with the engine cool- open spark plugs one by one and inspect if the plugs are black or oily.it meand that the ring piston is worn.are you sure that you car does not miss ? in that case if you find any one plug oily then try to replace it with new one. usually missing plugs does not fire oil seeps in and when it ignites a few time or when the engine is hot it gives smoke. but that is once a blue moon.
0helpful
1answer

Front bumper removal ford ka

Not to worry friend, when my car go sick i avoided going to mechanic looking for DIY_Repair whe n I found this website https://big-manuals.com/ and this book helped me repair it within an hour, all by myself!!!! It's amazing, no hassle at all

From wiring diagrams, illustrations, spark plugs info, parts info, stepwise instructions, torque specs, error/fault codes, engine info, to every single minute parts, you get everythingg in there you can't imagine how detailed it is
0helpful
1answer

Engine cranks but will not start. i have new fuel filter installed new plugs installed .i have fuel pressure at fuel rail ,i have spark at plugs and the injectors all read 11 to 14 ohms resistance per shop...

If you've got spark and fuel, it should fire up. Crank the engine for about 20 to 30 seconds then immediately pull one spark plug. if your getting fuel, it should be wet with gasoline. No wet,no gas. But then again, the code says rich mixture. Doesn't add up. Check all the connections at the mass airflow sensor and the crankshaft and camshaft sensors.
0helpful
1answer

I had 92 honda civiv hatchback, the sparkplugs get wet with engine oil from vave cover, does sparkplugs has its own individual seals?

The spark plugs, if getting wet from the engine oil dripping off of the valve cover gasket, is not good.
The boots of the spark plug wires will prevent the contacts from getting oily, but not for long. I would have the valve cover gasket replaced to prevent this from happening. It's not good to get the spark plugs and wires wet with engine oil.
1helpful
1answer

Hi there i have a 1.8 16v duratec ford mondeo 2001 its developed a misfire under load if you accelarate hard it clears

check your spark plug leads,and plugs,hasnt got wet recently,as after steam cleaning this can happen or plug leads getting tired
Not finding what you are looking for?

508 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...