2008 Ford Focus Logo

Related Topics:

k
ken emery Posted on Feb 14, 2015

I have a 2008 Ford focus convertible the problem is the N/S/F Window does not drop about 10mm when you try to get out of the door you can drop the window with the window switches fine and If you open or close the door from the outside handle the window drops fine I have tried to reset the window but that did not work all other windows are ok. Is there a cable that operates the window from the inside door handle or is it a electronic sensor that triggers the window ? Ken

5 Related Answers

A

Anonymous

  • Posted on Jun 11, 2008

SOURCE: 92 F150 power window and locks

try taking apart and cleanig all contacts first. make sure you are getting power to switch. Sounds more switches are going bad. They usually last about 5 to 7 years before they start going out.

Ad

Anonymous

  • 9 Answers
  • Posted on Jan 07, 2009

SOURCE: power rear windows of 2005 ford focus will not close

Most the time it is the Switch!!
Try pushing harder and maybe wiggling the rocker while you push !!
If It Works Pick up some electric switch cleaner and spray on switch (under push part) work Switch for a while Should be OK !!

Ajkill

Anand Kumar

  • 2035 Answers
  • Posted on Jan 12, 2009

SOURCE: PROBLEMS WITH POWER WINDOWS

Check the fuse in the car it may be blown , if its fine then power switch board may be defective ..


Good luck....

joedc

  • 79 Answers
  • Posted on Oct 12, 2009

SOURCE: rear passenger window on my 2003 ford expedition

replace the window mechanism on that door

agent91

Ned White

  • 2100 Answers
  • Posted on Feb 10, 2010

SOURCE: FORD FOCUS 1.8 tdci DRIVERS WINDOW STOP WORKING

I would check all the fuses first, then the switch, then the motor, before I replaced the window operator. The panel should pop right off after removing a couple screws behind the handles, maybe a couple along the bottom behind little buttons. Your car looks new, I can't believe the motor has quit already.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I'm trying to remove the front door panel on a 2008 ford focus and I've removed all the screws and still won't come loose. Don't want to break the plastic inserts.

There is a tool to help pry the panel off that slips around the plastic pins. And you often times break the pins as they are not designed to be reused.
0helpful
1answer

How do i replace a 2008 chrysler sebring convertible drivers side mirror?

remve teh black plastic cover from the door then remove the door panal undo the conector if its power mirror remove 3 10mm nuts revers for instolaton
0helpful
1answer

How do i take a door window out of 2008 ford focus

first take the door panel off on the inside of the door .... a few screws hold it down then slide the panel up a pinch and pop it off then you will see a few holes there are a few screws that go through plastic and the window just remove these screws while having someone hold the window so it dont slip down into the door... once removed the screws simply pull the window upward and out of the door.
2helpful
1answer

Bolt size for 2008 ford focus side mirror

Thread size is 8mm 10mm is the head size meaning you use a 10mm socket
0helpful
1answer

What tools do I need to change brake pads on ford focus 2008

A few of these poster are making assumption's on what model 2008 Focus the question is directed. Actually on a Ford Focus S with a 2.0 liter the caliper is held on by 2 metric bolts.
I believe the caliper housing is held on by a 15 mm bolt, and you might need a 17mm to hold the caliper pins from spinning.
A 2008 Focus has no removable spring, just a spring plate that the brake pad rides in.
Remember to loosen the bleeder line with a 10mm when you compress the caliper to get rid of the excess fluid or take off the cap to the master cylinder, so the pressure will not damage the master cylinder. Make sure and clean the caliper slides with brake cleaner and lubricate them with a good non-petroleum base grease.
0helpful
1answer

Passenger window on 2001 ford focus has dropped off track, how do i fix this

Remove the door panel anytime you have
window issues & they fall down or make a
noise & don't move

When you get access to the inner door panel,
you will see the problem

Not off any track, the regulator broke
0helpful
1answer

Taillight removal on 2008 rav4

Yea it is hard to remove, you will need a extra long 10mm socket, open access door behind tailligth and remove 4 10mm nuts. becarefu not to drop them it will be so hard to retreave.
1helpful
1answer

How to fix a window off track on 2002 ford focus

Remove the door panel and check alignment of the drop channels and adjust accordingly to secure the glass, also operate on correction to ensure an equal horizontal lift by the mechanism.
Regards.DT.
8helpful
1answer

2008 Ford Fusion Wing Mirror Replacement

I checked Ford Focus mirror replacement and it seems to be the same. This is for the manual, unheated mirror.

Remove the mirror cover inside the door - slide a screwdriver behind the cover and pry loose carefully.

Remove the single 10mm bolt and the mirror comes free.
NB. Do not drop the bolt into the door.

Not finding what you are looking for?

94 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...