Cars & Trucks Logo

Related Topics:

Jammie Palmer Posted on Dec 07, 2014

I have been using my con top manually, all of a sudden one day power windows will not work, saab 900se v6 con

Undo battery, check fuse , unplug window control unit.

5 Related Answers

Anonymous

  • 341 Answers
  • Posted on Oct 23, 2008

SOURCE: Looking for OBD I Code Reader for 1995 SAAB 900SE v6

www.ToolSource.com

Ad

Anonymous

  • 76 Answers
  • Posted on Jan 05, 2009

SOURCE: how to program 1995 900se saab radio

Tune to the first and lowest station on the band that you want and push and hold button number one (in the row of buttons immediately below the station display) until the number shows on the display and flashes. Pre-set one is now that station. Repeat, using button two for the next, and so on, until you have all the stations you want programmed.

Anonymous

  • 6 Answers
  • Posted on May 02, 2009

SOURCE: Driver side power window stops working in 2003 mits. eclipse

i had same problem in the drivers side boot between door and body move boot to one side and then the other to expose wires see if any are broken or frayed i actual cut the boot the long way on one side and removed it then cut tape to expose all the wires. at first when this happened to me my drivers side window was intermiten than it would not go up or down by itself until i jumped the window motor from the battery i found 2 to 3 wires broken. repair wires with wire crimp connectors or loosen wire harness from plastic tie straps to give xtra room and twist together and wrap with elect tape put boot back and wrap with eletrical tape

Anonymous

  • 5 Answers
  • Posted on Aug 18, 2009

SOURCE: 2002 ford explorer xlt with no dashboard functions

Yes, just removed #17 fuse and reinstalled and everything returned. Maybe bad connection, or maybe something was drawing current and that's it's function, (cut power) but it just didn't reset? (Owner's manual lists one function of Circuit #17 as "Battery Saver')

Anonymous

  • 1 Answer
  • Posted on Dec 10, 2010

SOURCE: I changed the battery in my 2005 PT Cruiser and

You will need to take it to the dealer to get the computer re programed. It happened to my 05 pt convertible and the windows and top would not work. this is not a warrenty item it is software. about $ 400.00 DLRs. Nash Ox CA.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Fuses for power windows

Check this link for the fuse box in this vehicle:

Interior Fuse Box Location 2003 2007 Saab 9 3 2004 Saab 9 3 Arc 2 0L 4 Cyl...

Also look on this site for extra info on saab power windows:

Fuses for power windows
0helpful
2answers

Saab 93 drivers window wont go down

Probably the button itself is the problem on the driver side. If the button on the passenger side still works then I would replace the power window button. As it gets older moisture and dirt play a big role in low voltage components.
0helpful
1answer

I have a saab 900se turbo convertible - the top won't go up

Believe it or not its a 12 dollar plastic peice that broke happened to me grinding nosie hatch not opening ... brought it to saab got the call its a 12 dollar part but takes 5-6 hours 700 dollars to fix that.. so I thought to do it myself because it broke again if done wrong the roof will twist and bye bye window hello hole new soft top
0helpful
1answer

I was rolling down a window when all of a sudden the follow 4 things STOPPED WORKING and haven't worked since: - All power windows - Heater blower - Horn - Wipers All of the relays I've found seem in tact...

Is the car a convertible? If so the window controls operate through the convertible top computer.
By ignition switch module are you talking about the part under the lock cylinder? They do fail a lot.
What do you mean by the relays are intact? Have you checked for power at each fuse with the key on?
0helpful
2answers

I have a '97 saab 900 5 speed and my windows, wipers and blinkers all don't work I have checked the fuses and the are all fine. How do I fix it

I have had this before. Once I turn the key to the st position for starting I turn it back a click to the on position and everything works.
1helpful
2answers

1998 Saab 900SE Turbo - Engine Sputtering

Replace oil press sending unit
0helpful
2answers

Noise Top end of V6 Saab Engine

hey i dont know if u already solved ur problem but i was having the same problem with mine so i went and bought this solution called risoline, compresion repair. when i changed my oil i poured that stuff in first and then the oil. with in a day it stoped the clicking/knocking noise. hope this helps
0helpful
1answer

1995 Saab 900SE V6

having a problem with my 1995 saab 95 when having the muffler change all of a sudden the casket and the value are blowed, those this happen offen, or is it related to the muffler that this can happen, please help me with this? Hperez
Not finding what you are looking for?

55 views

Ask a Question

Usually answered in minutes!

Top Saab Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...