2002 Chevrolet Malibu Logo

Related Topics:

A
Anonymous Posted on Oct 04, 2014

How to change fog light bulb 2002 chevrolet malibu

Fog light replacement

3 Related Answers

Anonymous

  • 3533 Answers
  • Posted on Mar 22, 2009

SOURCE: Replace the driver's side fog light bulb

put the car on ramps and I am pretty sure it comes out from the back underneath the car and if needed for any parts you can check out www.schramauto.com or call them at 1-800-292-1032

Ad

Anonymous

  • 863 Answers
  • Posted on Nov 23, 2009

SOURCE: 2002 Chevrolet Suburban - My fog lights will not

Check to see if you got a good ground wire and check the electric line for breaks.

clifford224

Clifford Beard

  • 1975 Answers
  • Posted on Jun 02, 2011

SOURCE: How do I change right

Here's the information I found. This should be in your owners manual if you have one. If you don't and would like a copy, you can email me at [email protected] with your make, model and year and I will be happy to email you a copy. Don't worry no cost to you. I hope this helps and good luck.


clifford224_679.gif clifford224_680.gif

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How do I change the 'Check Engine Light' light bulb on a 2011 Chevy Malibu?

Question edited for clarity.
Question moved to Chevy Malibu.

There is a good video on removing and replacing the check engine light bulb on a Mustang.

https://www.google.com/search?q=chevy+malibu%2C+change+the+%27Check+Engine+Light%27+light+bulb

Here are videos on removing the gauge cluster on a Malibu.

https://www.google.com/search?q=2011+chevy+malibu+remove+gauge+cluster

..
0helpful
1answer

2002 Chevy monte Carlo fog and reverse lights don't work

maybe the lights are just out. you might just have to replace them.
4helpful
1answer

HOW DO YOU CHANGE THE BULBS OF THE FOG LIGHTS?

The fog lights on most vehicles sit directly underneath the headlight bulbs. The ballast and wiring work just like the headlights, so changing them takes not much time. The procedure to change the fog light is as follows:-- 1) Open the hood and reach down underneath the headlights to unplug the electrical plug from the fog light assembly. Squeeze the top of the release tab and pull the connection off the bulb's ballast. 2)Turn the fog light counterclockwise to remove it from the fog light housing. 3)Install the new fog light bulb.Then connect electrical plugs properly. 4) Test the fog lights by turning it ON. Thanks. you can rate this solution and show your appreciation.
0helpful
1answer

Rear light problems

check all the wiring for that light and if u have power in all that mean you may have replace the wrong type bulb
1helpful
1answer

Fog lamps won't turn on

OK, you will need to first check the fog light wiring harness. make sure there are no worn wire lines or connections, replace if you see noticeable flaws in the wiring harness. Next, check the clip that fits over the back side of the fog light bulbs. Make sure that the inside copper pins are in good condition and, the the fit is tight. replace the wiring harness if these clips are worn or not fitting properly.

If the above inspections show no apparent wiring harness issues, you will then need to check for bulb failure. make sure that your fog light bulbs are operational. if the bulbs are ok, replace the switch.

Please rata and have a great day:)
0helpful
1answer

Replace the driver's side fog light bulb

put the car on ramps and I am pretty sure it comes out from the back underneath the car and if needed for any parts you can check out www.schramauto.com or call them at 1-800-292-1032
0helpful
1answer

Problem with 1998 chevy malibu fog lights

hi disconnect your fog light switch if this doesn,t knock them off you need to find the fog lights relay and replace it as the fog light circuit is shorted best of luck yates210456
10helpful
2answers

Changing fog light bulb

I just replaced the fog light bulb on my 2008 Azera. I went under the car and removed two screws from the protective shield. I pulled down the shield and reached up and turned the fog light socket and pulled it out of the housing, remembering which side the wires were on and removed the old bulb (Don't touch the new bulb with your hand) and replaced it with the new bulb. The job took less then 15 minutes
Not finding what you are looking for?

125 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...