2004 Ford Taurus Logo

Related Topics:

A
Anonymous Posted on Sep 11, 2014

Clock spring replacement on a ford Taurus 2004

Air bag not light is on horn is not working

5 Related Answers

Anonymous

  • 373 Answers
  • Posted on Jul 11, 2008

SOURCE: air bag code

Hi, ON your 2002 ford taurus, The Flashing code 33 ( B 2292 )

This code refer to : Driver side seat belt pretentioner ( seat belt bucklet) problem.

Check the conecctions under the driver seat.
Repair as need, and recheck if thi code is present.

But if you had an accident on you taurus. You need to replace the Seat belt Pretentioner ( seat belt bucklet)

OK. I hope this information work for you.

Than's.

Ad

Denis Aube

  • 142 Answers
  • Posted on Aug 27, 2008

SOURCE: Air Bag Code

Code 52 relates to low voltage detected in a capacitor inside the airbag module. 45 seconds after key on, this capacitor should have a voltage of around 23 volts.

This capacitor stores energy to deploy the airbag in the case of a collision.

Because your airbag light is on, your system is deactivated (cannot deploy)

In your case, the airbag computer detects less than 23 volts at that capacitor 45 seconds after key on, and disables the system.

There is a diagnostic procedure involved in fixing this problem, but usually means a bad airbag module (computer)

This should only be checked by a qualified technician, as airbag service can be dangerous and there are strict procedures to follow so the bags don't inflate suddenly and cause injury.

Anonymous

  • 1 Answer
  • Posted on Apr 01, 2009

SOURCE: 97 ford taurus air bag module location

It"s in the steering column...

scott

  • 532 Answers
  • Posted on Apr 18, 2009

SOURCE: air bag light flashing

the clock spring behind the steering wheel could be bad,about a $100.00 part through Ford

Anonymous

  • 1985 Answers
  • Posted on Jan 21, 2010

SOURCE: air bag light on constant, horn not working,

you need to have the codes read for the air bag to know for sure which direction to start ,but yes, they are all tied in to the clock spring.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How do I get the airbag light to go off on my 2004 Ford Escape

Have code's read an fix the problem or could be a bad clock spring . Do you know what that is ?

No Horn Flashing Air Bag Light EASYClockSpring Replacement 02 05 Explorer
1helpful
1answer

How to get to the horn swicth on steering wheel of 2000 pontiac sunfire

Pull the air bag module , don't recommend you do that ! Is the air bag light lit on the instrument cluster ? Horn not working an air bag light lit would indicate clock spring problem . Do you know what the clock spring is ?
How cars clock spring works

Did you check the horn relay ? Do you know what a relay is ?

VEHICLE RELAYS Operation Diagnosis

1helpful
1answer

What do I have to do to replace air bag/horn switch on a 2005 Ford F350 6.0L diesel?

Horn swith or clock spring ? Is air bag light lit on the instrument cluster ? You would have to take air bag module off the steering wheel .An to do that you have to deenergize the air bags , pull a fuse an disconnect the negative battery cable . Then you have to pull the steering wheel . Videos on youtube showing to replace clock spring ! Steering Column Airbag Clockspring Repair Ford Superduty 1999 Up
0helpful
1answer

2001 f250 airbag light came on horn won't work or cruise controls or automatic hubs won't lock. Is this all connected? It happened at the same time

The horn switch and the air bag and cruise control wiring in the steering wheel go through the clock spring, ford calls it air bag sliding contact. The clock springs have been know to go bad.

Steering Column Airbag Clockspring Repair Ford Superduty 1999 Up
1helpful
1answer
1helpful
1answer

Why would my cruise and horn both quit working at the same time?

most likely the clock spring under the sterring wheel is bad. Normally causes the air bag light to come on too.
3helpful
1answer

Air bag light on constant, horn not working, cruise control not working...clock spring problem?

you need to have the codes read for the air bag to know for sure which direction to start ,but yes, they are all tied in to the clock spring.
2helpful
2answers

Horn wont work but works with the panic button

The computer controls the horn and looks for a signal from the Remote Keyless Entry system or the horn button. Due to the fact that the horn works with the RKE but not when you press the horn button, would cause me to suspect that the Clock Spring mechanism, which is also used to activate the Driver's Air Bag, might be malfunctioning. When the Clock Spring breaks, the computer does not get a signal from the horn button so it can not opperate the horn. If I remember correctly, when the Clock Spring goes out, the Air Bag light on the dash either does not light up for 2 seconds when you first start the vehicle, or it comes on and stays on all the time, which is to let you know that the Air Bag is not functioning, and the primary cause is the Clock Spring. So check your owners manual to see if the Air Bag warning light on the dash is functioning normally. Your local Chrysler dealer can quickly and easily check the function of the Clock Spring, Horn, and Air Bag system, through the use of the DRB scan tool. If it is in fact the Clock Spring that is malfunctioning, the Air Bag module and the steering wheel must be removed in order to replace the Clock Spring, which should be left to a trained professional, that has been educated on the proper handling of the Air Bag system. You wouldn't want to accidentally deploy the Air Bag, as you could be injured. That and Air Bag modules can be expensive to replace.
1helpful
1answer

Air bag light flashing

the clock spring behind the steering wheel could be bad,about a $100.00 part through Ford
0helpful
2answers

1998 Ford windstar horn wiring

There is something called a clock spring in the column that is used for the airbag, horn and cruise control buttons. This clock spring if messed with will cause a/bag light to come on and possibly cause a/bag failure if there is a collision. DON"T mess with the wiring in the column. Run new wires in to the horn or install an a/market horn.
Not finding what you are looking for?

367 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...