SOURCE: Replace Cruise Control Switch in Steering Wheel
I am describing the procedure for the "On/Off" switch, I did not try the one you mention. Buy the switch anywhere ( about $15 ), then use a sharp tool ( small knife, screwdriver, anything ) to gently pry the old one from its socket. It is not glued or screwed in or anything, just squeezed tightly in the socket. Once the switch is out, pull the cable, connect it to the new one, insert back in the socket and press gently. No force necessary, it comes out easily.
SOURCE: cruise control
The cruise control should have a fuse in the interior fuse block, and a larger fuse and/or relay under hood in the relay center block. Test them with an automotive test light (You can purchase these for anywhere from $5.00 to $50.00 depending on the quality you want and the place of purchase).
If you find a bad fuse or primary fuse, obviously those need to be replaced. Relays can't be tested readily using the light. Unfortunately the simplest method for finding out if a relay is bad is to replace it. The relay for that cruise runs between $15.00 to $20.00 depending where you purchase.
Let me know how it goes and we'll see what more we can do!
SOURCE: 1998 dodge grand caravan cruise control not working
does the horn work and is the air bag light on because if thats the case you have a bad clockspring. and for your year van i do belive that is a lifetime recall. hope this helps.
SOURCE: Replacing a Cruise Control Switch
Ford Taurus/Sable 1996-1999 Repair Guide
Steering Wheel
Removal & Instalation
Fig. 1: Remove the access covers for the air bag module retaining bolts
Fig. 2: Remove the air bag retaining bolts and...
Fig. 3: Carefully remove the air bag from the steering wheel to access the wiring connectors
Fig. 4: Detach the connectors...
Fig. 5: ... from the air bag module
Fig. 6: Remove the center bolt from the steering wheel
Fig. 7: Install a suitable puller and tighten the forcing screw to...
Fig. 8: ... remove the steering wheel
CONTINUE...
SOURCE: how do i use cruise control on focus
Hello,
First the vehicle has to be operating at least 35mph. There will be two sets of switches, one set is to the left and the other set is to the right of the horn on the steering wheel. The switches on the left will be labeled on/off, the ones on the right we be labeled Coast/Accel/Resume..
At a steady highway speed press the ON switch, (at the left hand side of the horn) This will activate and turn the speed control system ON...
Then you have to set and adjust your desired speed...
To SET YOUR DESIRED speed , press and hold the accel switch (Right side of Horn) until your desired speed has been reached and then release the switch.. Speed control will now be on, activated and set, you will be in cruise mode..
If you need to coast due to possible traffic, press and hold the coast switch as long as you need to.. This is like taking your foot off of the accelerator pedal.. When you let go of the coast switch you will return to you set cruising speed.
Stepping on the brake pedal at any time will deactivate the system.. If you step on the brake, and then want to return to your previous set cruising speed... All you have to do is press resume...
I hope this has helped you? You can find detailed speed control activation instructions in your 2005 Ford Focus Owners manual.. If you did not receive your owners manual when you bought the vehicle.. You can purchase one at your local Ford, Lincoln or Mercury dealership..
Bill Andrade Ford Master Technician/Shop Foreman
124 views
Usually answered in minutes!
×