I have the 4 numbered code entered then cannot imput it have
SOURCE: radio code
You need to leave stereo on for up to an hour with ignition in position two , this will then allow you to re enter code
SOURCE: I changed the battery in
So if you were to pay a dealer for their time & have it
taken into the service bay, not a single tech could put
in a radio code
That is pure non sense
Sorry, I had to say something & I don't have your owners
manual or any other material to help you
Try asking another dealer, or see if you can have it
done with a scan tool at a local repair shop
SOURCE: Disc 2 Alpine radio ask for code ,Do have code but radio does not allow to enter code
Leave the radio on, until it displays the word "CODE".
then you can enter the code using numbers 1 to 4.
The time until "CODE" is displayed depends on the number of previous wrong entries. 1 minute for one wrong entry, 2 hours for 5 wrong entries.
Just put the radio on and leave it that way until it says "CODE"
SOURCE: entering security code radio
Hi Jeff,
i think your radio has power problem.
please check the radio fuse on fuse board if its good please ask for repair electronics technician to fix power problem of your radio.
it can be the failure of sound output cct or power regulater cct .
regards,
nuwan
Testimonial: "Hi Nuwan surry but no help traced power into unit 2 power in and good earth .have power off does nothing till u press no 1 inpot button till 6 then turn on raido, turns off 3 to 4 min never askes for a code this unit connected to cd stacker , any help welcome thanks jeff"
304 views
Usually answered in minutes!
×