Cars & Trucks Logo

Related Topics:

g
ginnbains10 Posted on Feb 13, 2018
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Ford transit 2010 model wiring diagram for windscreen washer pump

Windscreen washer pump failed all of a sudden,if you give direct feed to pump it works,if you press the stalk the wipers operate but pump doesn't work,can not locate fuse for pump,checked the fuses in fuse box in engine bay and behind glove box,none of them indicate a fuse for washer pump.

1 Answer

paul fairbanks

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

  • Ford Master 1,151 Answers
  • Posted on Feb 14, 2018
paul fairbanks
Ford Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Genius:

An expert who has answered 1,000 questions.

Joined: Mar 28, 2013
Answers
1151
Questions
13
Helped
342819
Points
2934

The wiring on the back of the column switch may have broken off check that first common prob

5 Related Answers

Anonymous

  • 259 Answers
  • Posted on Mar 15, 2009

SOURCE: Toyota MR2 - windscreen washer s not working.

under the bonnet it should be near the back from the washers you will see a plastic hose follow that back and you will find the pump

Ad

Anonymous

  • 60 Answers
  • Posted on May 05, 2009

SOURCE: megan 1.5d no power to cig. lighter socket, fuse

the lighter socket run on the same fuse as interear light witch will be staited on the fuse box lid. however lighter sockets are comon for fault becaus they get so hot so you may need to replace it. hope this helps

Anonymous

  • 1 Answer
  • Posted on May 05, 2009

SOURCE: I need to locate the fuse box diagram the electrics dont work

Isimply put a new fuse box in the car, and check all the electric wire .

kathy kramer

  • 27 Answers
  • Posted on Feb 04, 2010

SOURCE: Rear windscreen washer not working.

First check the fuse if one. chances are the motor is locked up.

Anonymous

  • 722 Answers
  • Posted on Mar 14, 2012

SOURCE: windscreen and headlight washers not working

It sounds as though their is a short, loose connections, or the water punps for these are out.
Inquire with a technician for diagnostic options.
carsandcomps

Testimonial: "Yes, thanks for the help, it looks like both washer motors iced up in the cold weather so both packed up at the same time (thats what had me puzzeled).- Moral of the story- - make sure theres an additive in your washer water to stop it freezing !!! Thanks again to all who replied, Ian "

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Windscreen washer on Ford Focus comes out rear instead of front most of the time.

Looks like a Body Control Module communication issue.

Windshield Washer
When the washer switch is pulled towards the driver, the SASM sends the washer request to the BCM over the LIN. The BCM activates the windshield wash relay (internal to the BCM) and sends a message to the driver side windshield wiper motor. When the BCM activates the windshield wash relay, voltage is provided to the washer pump, directing washer fluid to the windshield. When the switch is released, the windshield wiper motor continues to activate the windshield wipers for 3 additional wipes and then turns the windshield wipers off.


https://www.justanswer.com/ford/74red-focus-2012-ford-focus-se-need-wiring-diagram-washer-pump.html

..
0helpful
2answers

2017 Ford Transit Custom windshield washer pump fuse location please.

https://fuse-box.info/ford/ford-transit-custom-2016-2018-fuses-and-relays
0helpful
1answer

Hazard, interior & door ajar lights blink on an off with a clicking sound when I turn the steering wheel right.. I have a 2010 ford transit connect.

you can get guide from many sites.. i know few
error codes/ fault codes, wiring diagrams, schematic diagrams, torque specs, engine info, switches functioning, assemble, disassembly, complete refurbish, repair, installation every single thing is covered
1helpful
2answers

How do I remove a oil pan on a 2010 Transit Van

https://ibb.co/cWtbC8

Click on the link. This is for ford transit connect.
0helpful
1answer

Looking to find out which fuse is for windscreen washer in Peugeot rcz

On most vehicles, the wiper fuse also serves for the washer pump motor. Not too sure about Peugeots, though. Just check for power at the pump motor connector, with key on and lever/switch pressed for the washer. If the wire has power, it is the motor or the ground for the motor. If there is no power to the pump motor, check the washer switch. There should be a hot wire going to it with the key on.
0helpful
1answer
0helpful
2answers

Ford transit forum

Was the old switch tested & bad?

Need a wiring diagram to work on windows

Can't work on any vehicle problem, until you
have the required info & study how the system
works, first.

Have to test things to find a problem, before
you can correct it
0helpful
1answer

Windscreen washer not working

Most likely the pump (motor) is gone and needs replacement. However, it is worth checking that fuse allocated to windscreen washer is intact. Furthermore, you may also need to check the wiring for flow of current at lever end (handle on the steering wheel) and wires connecting to pump on the water reservoir.
0helpful
2answers

Find windscreen washer pump on 1999 ford fiesta

The washer pump is usually mounted on the reservoir or very close to it, that type of pump does not **** very well so it needs a head of fluid to be able to pump.
0helpful
1answer

Windscreen washer problem

Go and invest in a 12 volt test light. They can be purchased at any parts store. Attach alligator clip of light to a good (any) ground. Have someone activate the washer pump while you pierce the wire with the ice pick end of the test light. One wire is the ground the other is the 12 volt feed to the pump. The ground wire will be black or brown. You might want to just check both wires. If voltage is present the pump motor is bad and will need to be replaced. If there is no voltage you have an open circuit between the fuse and pump motor. Run the test first and let me know what you find.
Not finding what you are looking for?

352 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...