1996 Honda Civic Logo

Related Topics:

A
Anonymous Posted on Feb 18, 2014

How to fix the dashlights for my 1996 honda civic

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Mar 15, 2009

SOURCE: need to remove window crank on 1996 honda civic

I have a 97 honda accord and it is helpful to have the tool to remove the clip. you can pick one up pretty reasonably at the local car store. it's pretty much a flat tool that fits between the handle and the door pane.'

Ad

Anonymous

  • 15935 Answers
  • Posted on Apr 05, 2009

SOURCE: How to change upper control arm on 1996 Honda Civic DX ?

UPPER CONTROL ARM:

Do not disassemble the upper arm. If the ball joint or bushings are faulty, or the upper arm is damaged, the entire upper arm must be replaced.

  1. Raise and support the vehicle safely.
  2. Remove the front wheels. Support the lower control arm assembly with a floor jack.
  3. Separate the upper ball joint from the steering knuckle using a ball joint separator tool.
  4. Remove the self-locking nuts from the upper arm anchor bolts. Remove the upper arm from the vehicle.

Do not disassemble the upper arm. If the ball joint or bushings are faulty, or the upper arm is damaged, the entire upper arm must be replaced.
To install:
Use new self-locking nuts when installing the upper arm and strut.
  1. Install the upper control arm assembly into the strut tower.
  2. Connect the upper ball joint.
  3. Install the front wheels and lower the vehicle.
  4. With all four of the vehicle's wheels on the ground, torque the upper control arm nuts to 47 ft. lbs. (65 Nm). Torque the castle nut to 32 ft. lbs. (44 Nm); then, only tighten it enough to install a new cotter pin.
  5. Tighten the wheel nuts to 80 ft. lbs. (110 Nm).
  6. Check and adjust the vehicle's front end alignment.
The bushings on the front lower control arms are replaceable on most models.
This procedure requires the use of a press and may be above the skill range of the average driveway enthusiast. It is recommended that this procedure be done by a qualified machine shop if you are not skilled in the proper use of a press.
  1. Remove the lower control arm that is in need of new bushings.
It is recommended that both the left and right lower control arm bushings be replaced at the same time. The vehicles handling may become unstable if there are new bushings on one side of the car and worn ones on the other.
  1. Set up the control arm in a press.
  2. Using a impact socket of the correct length and size, press out the old bushing.
  3. Install the new bushing by slowly using the press to push it into the control arm.
  4. WARNINGExcessive force could cause the bushing to bend or tear so be careful.
  5. Once the bushing is properly seated in the control arm, remove the arm from the press and install it on the vehicle.

Anonymous

  • 3 Answers
  • Posted on Apr 09, 2009

SOURCE: fuse diagram for 1996 honda civic

try this link... let me know if this is what you needed... http://img530.imageshack.us/img530/8770/9600civicfuse98civicexatb2.jpg

Anonymous

  • 2 Answers
  • Posted on May 15, 2009

SOURCE: HONDA CIVIC 1996 PULSING IDLE

It might be bad gas or a plugged filter or it might be a bad mass airflow sensor.

Anonymous

  • 713 Answers
  • Posted on Aug 27, 2009

SOURCE: 1996 honda civic dx interior dash lights turn, headlights on.

it is more than likely a short in the headlight switch. also try the dimmer switch on the dash for the dash lights.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Fixed srs light( blinked twice) for code reset later when car started, it fired and died immediately, starter cranks but no spark or fuel?

Follow the given link, maybe you get something useful.
https://www.reliable-store.com/products/honda-civic-service-repair-manual-1996-1998-download HONDA CIVIC SERVICE REPAIR MANUAL 1996 1998 DOWNLOAD
0helpful
1answer

1996 honda 160i luxline remote imobilzer programing

reset immobiliser I HAVE A HONDA CIVIC 1.6 LUXLINE ...

www.fixya.com/cars/t23058317-reset_immobiliser
Jan 22, 2014 - reset immobiliser I HAVE A HONDA CIVIC 1.6 LUXLINE 1998. I NEED TO BYPASS THE IMMOBILSER TO START THE CAR WITHOUT IT ... Press any button on remote one time within 20 seconds. .... How can i fix my honda 160i luxline92 model starting difficulty? Jul 20 ... Jun 09, 2012 ' 1996 Honda Civic.
0helpful
1answer

1996 Honda Civic driver door window wire harness connector is bad

Try a wreckers that specialises in wrecking Honda for the harness.
0helpful
2answers

Overheating

Hello www_junelgen and thank you for asking your question, on Fixya.

Here is a simple process that will walk you through a few steps that will pinpoint the overheating problem on your 1996 Honda Civic, without even using any tools. It has helped millions of people, and I am certain that it will help you, because I wrote it for people in your exact situation.
How to diagnose your overheating 1996 Honda Civic
Pay close attention to the 'fixing leaks' part. You will probably need a heater core (from the sounds of it).

Get more great (money saving) tips and tricks about your vehicle from: twitter.com/acoates23234

Thanks for the vote, and good luck!
0helpful
1answer

What is the best type of gasoline recommended for this car?

91 octane or higher, good luck and thanks for using FIX YA
0helpful
1answer
0helpful
1answer

I have 1996 model honda civic. I don't know the gas octane

95 unleaded its on the inside of the petrol cap
0helpful
1answer

Fuse diagram for 1996 honda civic

try this link... let me know if this is what you needed... http://img530.imageshack.us/img530/8770/9600civicfuse98civicexatb2.jpg
0helpful
1answer

1996 honda civic

The upper ball joint will be fixed.. you have to buy a complete new A-arm.

This was the case on my 00 Civic 5 door.
Not finding what you are looking for?

38 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...