SOURCE: how do i go about
The is no adjustment to make them titer, just change the legnth of them for the alignment, find the loose one and replace it
SOURCE: Front End noise and vibration
Check the U-joints and axle baerings. But its most likely because the truck is in four wheel drive.
SOURCE: 2004 camry, vibration right front
If the wheel is in balance and there is no other signs of what is causing the vibration than yes that cv joint should be chk. Is the strut ok? might want to chk. that too.
SOURCE: Car jerks to left w/no warning
My opinion, not a good car. But that is a different story. It would be easiest to bring the car in for an alignment. The technician will tell you what the car needs to do the alignment. But if you want to do it yourself then you will need to inspect all the steering componants (tie-rods,struts, lower ball joint, wheel bearings, brakes, wheels, tire wear,tread pattern, and tire pressure, and lug nuts (loose or overtightened). Good luck.
SOURCE: steering wheel vibration
Did they "turn" your rotors? They may have "improperly" turned your front rotors. This is common and they should correct this where you had the work done.
49 views
Usually answered in minutes!
×