I am trying to locate the low beam headlight relay
Hello I am also having a similar issue, I changed my cigarette lighter fuse when putting the fuse box back into position I have ripped insulation round one wire problem is it hit the metal bracket as a result I have no low beam, I have check all fuses each ok, I have also check for power to the bulb and I’m getting no power has anyone any idea of what the problem could be please, Also Toyota Ed would you send me those two PDF files for headlight diagram would be very much appreciated,
I have the same prob low and hi dont work changed relay, checked fuses... i have power at the relay (LB)
SOURCE: Low beam headlights don't work
I have e-mailed you 2 .pdf files, one is the complete headlamp diagram, and the other is the relay locations. Please advise if you need further assistance.
Toyota Ed
SOURCE: low beam headlight /daytime light are not working
It's on the driver's side. Remove all the plastic & it's in there.Big rectangle, black box,about 1.5" thick,lotta wires.
SOURCE: where is the headlight relay located?
Headloght switch or dimmer HI-Lo switch is what I would look at. The power to the headlights goes through the dimmer switch before it gets to the bulbs. No relay!
SOURCE: How to replace high/low beam switch on 2004 Ford Focus LX?
Should be fairly easy. Make sure to disconnect the positive battery cable. Remove the cover from around the column behind the steering wheel. Should take a star driver to remove the screws holding the cover together. Once the screws are removed pop the cover apart and you will see the multifunction switch on the column, should have two to three screws holding it to the column remove the screws and it should come out pretty easy replace with new one and put back together.
Testimonial: "Thank you so much!"
SOURCE: 2005 Ford Focus ZX3 SES, the blue high beam
It sounds like you are confused about how your headlamp system is supposed to work. The DRL does not run on the High beam circuit, it runs on the low beam circuit. The fog lamps are supposed operate with the park lamps and also with the low beams, not the high beams. From your description, I would say that your system is operating as designed and you are having trouble telling High from Low. (Don't feel bad, that is why high beam indicators were invented in the first place.)
http://repairhelpcenter.blogspot.com/2012/01/passenger-side-low-beam-out.html
------------
Low beam HID light goes out?
http://schematicsdiagram.blogspot.com/2012/01/low-beam-hid-light-goes-out.html
----------2007 Dodge Caliber: Low Beam Headlight Not working
http://technoanswers.blogspot.in/2012/06/2007-dodge-caliber-low-beam-headlight.html
-------------Chevy Tahoe: Low Beam Lamps are not working?
http://technoanswers.blogspot.in/2012/04/chevy-tahoe-low-beam-lamps-are-not.html
----------2001 Chevrolet Tahoe: Both Low Beam Lamps Not Working?
http://technoanswers.blogspot.in/2012/04/2001-chevrolet-tahoe-both-low-beam.html
--------------2002 Toyota Tacoma: Low Beams not working?
http://technoanswers.blogspot.in/2012/04/2002-toyota-tacoma-low-beams-not.html
-----------Low beam headlights Modification?
http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html
-----------DRL and Low beams not working?
http://schematicsdiagram.blogspot.in/2012/04/drl-and-low-beams-not-working.html
-----------These will help.Thanks.
Turn the engine off, open the hood, and disconnect the negative battery cable (--) with your pliers.
Locate the power distribution box against the firewall on the driver's side of the engine compartment. Flip up the latch and remove the plastic cover.
Determine which headlight fuse you want to replace. The 2001 Ford Focus uses four headlight fuses--one for each headlight. Fuse number 16 is for the passenger side low beam; fuse number 17 is for the driver's side low beam. Fuse number 26 is for the passenger side high beam; fuse number 27 is for the driver's side high beam.
Grasp the fuse with your fingers and pull it straight out of its mount. Insert the new fuse in its place. Replace the plastic cover and reconnect the negative battery cable.
2,729 views
Usually answered in minutes!
×