u did something wrong, recheck ever connection and verify proper hookup, other than that suggestion there is nothing else i can adviseu did something wrong, recheck ever connection and verify proper hookup, other than that suggestion there is nothing else i can advise
AnonymousMar 25, 2014
no power what so everno power what so ever
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 3:23 www.youtube.com/watch?v=I2SUGIvYAWc Jul 12, 2013 - Uploaded by Raybob216
My 04 exployer left turn signal and break light not working fix loose wires behind ... bulb and come to find out wire had popped out of the harness. ... How to Change Ford Explorer 2002 Flasher Relay for Hyper Flasher Relay ... How To Install Replace Turn Signal Wiper High Beam Switch Ford Ranger 95-98 ...
I have seen this problem and it is very often a problem with the engine wiring harness, where that may lie is anyones guess, look at places where the harness moves around allot.
Some models have single horns, others have two (or more).
Some horns are already earthed, hence may not require the use of an earth wire.
If you have noticed a spare wire/connector coming off the horn harness, this could simply be part of the standard factory horn harness (which was also used for the multiple horn types), making this a redundant connector.
If your horn is working, then I believe the all is in order. If however, your horn does not work, then suspect there is a broken connection.
possibly cracked or dry-rotted vacuum lines are being moved in just the right spot to allow it to run for a period of time until it becomes jarred again visually look for unattached vacuum lines and dry-rotted lines
u did something wrong, recheck ever connection and verify proper hookup, other than that suggestion there is nothing else i can advise
no power what so ever
×