1997 BMW 328 Logo
Jethro Beatty Posted on Nov 03, 2013

Fog lights don't work new bulbs - 1997 BMW 328

1 Answer

Bob_R

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 11 Answers
  • Posted on Nov 19, 2013
Bob_R
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Oct 19, 2007
Answers
11
Questions
1
Helped
4673
Points
19

If they worked before you put in the new bulbs and not after, you may have blown the fuses. The fuses are for a 55 Watt halogen bulb. Many people replace them with 100 watt bulbs which blow the two fuses. Replace the 7.5 amp fuses with 10 amp fuses, but nothing bigger or you could damage the wiring if you get a short.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers
0helpful
1answer

There is no fuse blown but the fog and tail light don't work,can it be the light switch

If the front side lights are working, then the switch is fine and this is more likely a bulb, wiring harness or connection issue.
0helpful
1answer

2002 Chevy monte Carlo fog and reverse lights don't work

maybe the lights are just out. you might just have to replace them.
0helpful
1answer

How do you replace the fog light bulb on 2008 avalanche

    • 1 Open the hood and reach down into the engine bay for the fog light assembly. If you cannot reach the fog light assembly from the top you may need to get underneath the truck to reach it. Remove the electrical plug running to the fog light ballast.
    • 2 Remove the bulb. Unlock the fog light bulb by turning it counterclockwise and pulling it straight out of the assembly.
    • 3 Slide a new bulb into the fog light assembly. The part number you will need for the new bulb will be located on the ballast or base of the old bulb.
    • 4 Turn the bulb clockwise to lock it into the fog light housing.
    • 5 Reconnect the electrical connector to the bulb ballast.
1helpful
1answer

How to change Ford Explorer fog light

p, li { white-space: pre-wrap; }

Open the hood and remove the electrical plug from the back of the fog light ballast below the headlight assembly.



Turn the fog lamp counterclockwise to unlock it from the fog light housing.



Insert the new fog lamp. Align the notches on the fog lamp housing with the tabs on the new bulb and turn the bulb clockwise to lock it into the housing.



Reconnect the fog lamp electrical plug.

4helpful
1answer

HOW DO YOU CHANGE THE BULBS OF THE FOG LIGHTS?

The fog lights on most vehicles sit directly underneath the headlight bulbs. The ballast and wiring work just like the headlights, so changing them takes not much time. The procedure to change the fog light is as follows:-- 1) Open the hood and reach down underneath the headlights to unplug the electrical plug from the fog light assembly. Squeeze the top of the release tab and pull the connection off the bulb's ballast. 2)Turn the fog light counterclockwise to remove it from the fog light housing. 3)Install the new fog light bulb.Then connect electrical plugs properly. 4) Test the fog lights by turning it ON. Thanks. you can rate this solution and show your appreciation.
1helpful
1answer

How do u change a bulb in the fog lights on a

The fog lights on most vehicles sit directly underneath the headlight bulbs. The ballast and wiring work just like the headlights, so changing them takes not much time. The procedure to change the fog light is as follows:-- 1) Open the hood and reach down underneath the headlights to unplug the electrical plug from the fog light assembly. Squeeze the top of the release tab and pull the connection off the bulb's ballast. 2)Turn the fog light counterclockwise to remove it from the fog light housing. 3)Install the new fog light bulb.Then connect electrical plugs properly. 4) Test the fog lights by turning it ON. Thanks. you can rate this solution and show your appreciation.
0helpful
1answer

Replace fog light bulb for 2006 Honda Odyssey

Touring Model
Use a wrench to remove the mounting bolt from the underbody through the hole in the splash shield.
Remove the fog light assembly from the bumper by pulling its inner edge first, then the whole assembly out of the bumper.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
Remove the bulb from the fog light assembly by turning it one quarter turn counterclockwise.
Push the electrical connector onto the new bulb.
Turn on the fog lights to test the new bulb.
Reinstall the fog light assembly into the bumper. Tighten the mounting bolt.
Insert the new bulb into the assembly and turn it one-quarter turn clockwise to lock it in place.
Hope this helps you.
0helpful
1answer

Put new bulbs in fog lights, now fog lights wont come on. 98 cadi catera. replaced old bulbs with new halogen bulbs now neither fog light will come on

Halogen bulbs are brighter and generally draw more current than standard filament ones.
Have you check that the supply fuse has not popped ?

10helpful
2answers

Changing fog light bulb

I just replaced the fog light bulb on my 2008 Azera. I went under the car and removed two screws from the protective shield. I pulled down the shield and reached up and turned the fog light socket and pulled it out of the housing, remembering which side the wires were on and removed the old bulb (Don't touch the new bulb with your hand) and replaced it with the new bulb. The job took less then 15 minutes
Not finding what you are looking for?

128 views

Ask a Question

Usually answered in minutes!

Top BMW Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

old marine
old marine

Level 3 Expert

2426 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...