You will need a timing light for Hi energy ignition as well as standard socket set or wrenches. 1. get the engine up to operating temp. 2 shut off engine connect the timing light to the number one[1] spark plug wire at the spark plug end connect battery connectors. 3 start engine and note location of pointer on the mark tab on the timing cover. 4 shut off engine loosen the hold down clamp on the distributor turn the bolt no more than one full turn[snug is better than loose here] then note the position of the dist. cap. Move the dist. to make sure it moves freely replace back to the starting position and remove and plug the vaccum line to the dist. 5 start engine and set timing to the desired spec. 6 shut off engine tighten dist. clamp bolt 7 start engine check timing one more time to see if still there at desired setting. 8 shut off engine dis-connect all tools and light
How can installer one installous
631 views
Usually answered in minutes!
×