Did you take out the center bolt? You have to remove the center bolt, then use a harmonic balancer puller. Not the two or three armed pulley puller, but a harmonic balancer pulley puller-the pullers with jaws that hook around the outside of pulley can ruin a harmonic balancer.
Use the impact gun to remove the center bolt. You won't need an impact gun to remove the balancer pulley. The balancer puller will take it right off the crankshaft, no problem.
SOURCE: I removed the harmonic balancer bolt, but cant get pulley off.
yes you can get a puller at any local parts store or harbor freight to pull it off
SOURCE: 1997 Bonneville - can't remove crankshaft pulley
You need a three jaw puller to remove the balancer. After you remove the center bolt the puller hooks into the three holes in the balancer.
SOURCE: CRANK SHAFT PULLEY
Yes Auto zone have loaner crankshaft pulley extractor
better know as harmonic valancer puller.
you pay a deposit and when you bring it back the refund your money
do not use a bicycle chain like tool because that will damage your pulley. unless you are planing to install a brand new one.
there is a rubber ring in between the outer and inner part of the pulley than can be real easily damage.
you can temporary float one cylinder whit gasoline and cap it of whit the spark plug that will lock the engine temporarily when you have to turn the crankshaft bolt.
when you are done just remove the spark plug and turn the crankshaft to drain out the gasoline and unlock the engine.
SOURCE: how do i remove the harmonic balancer on a 98
Use a jack under the oilpan raise slightly remove engine mount cross bolt let jack down then remove balancer.
SOURCE: I cannot remove the harmonic
you need a dodge puller it is the only type of puller you can use. when you get one you will see it comes with a set of shafts that go in the bolt hole to push ageist, a 1/2 impact also helps they are tight....GOOD LUCK
344 views
Usually answered in minutes!
×