It's mounted in the engine block under the injection pump on the driver side of the engine. It's right up against the power steering pump, above a motor mount.
SOURCE: where is oil pressure sensor located on 2001 dodge 2500 cummins?
Hello mhak330: My name is Roger and I can give you the answer to your question. Locate the ECM on the drivers side of the engine.look for the bottom bolt holding the ECM. To the right of the bolt you should see the oil pressure sender unit. Should you need further help please just ask. Please rate the quality of your answer. This way we know you received helpful information. Thank You for using Fix Ya. Roger
SOURCE: were is the oil pressure sensor located on a 1992 dodge dakota
It is located behind the breather, on the passenger side of the distributor. If you are having low oil pressure I'll give you a tip. You can change the sensor, but if that doesn't work, then the problem very likely could be that, dodge dakotas are notorious for a buildup of sludge on the screen of the oil pump, which blocks the flow of oil. If you are going to drop the oil pan to address this you may as well put a new oil pump in while you are at it. They are 30-50 dollars. If you can do it yourself, the whole operation should cost less than 100 dollars, if you take it to a garage, you better have a fat wallet.
282 views
Usually answered in minutes!
×