If you have no spark at the plugs, are you getting voltage and a ground signal at the coil when you crank the engine ?
SOURCE: car has no spark
is check engine light on,if yes,scan it,it will point you at problem area,you can inspect coil pack for cracks and corrosion,voltage supply
SOURCE: 2003 hyundai santa fe 4cly will not start plugs
Turn key on and see if you can hear the fuel pump running.
SOURCE: 03 tiburon cranks,but wont idle or run
does your alarm system go off, and result in it not starting???
429 views
Usually answered in minutes!
I get power to the the coil, as well as a ground, however, no signal telling the coil to send a spark (From what i can tell by putting a test light on the signal tab in the electrical connector). Also, the ecu code tells me that the catalytic converter is bad, replaced the cat, and both O2 sensors. no cracks or corosion on the coil, brand new. any chance i picked up a faulty cam sensor?
Anything is possible. Without a shop manual and the tools to diagnose the ignition system you may have to tow it to a shop. You might be able to test the cam and crank sensors with a meter or test light if you know what to look for.
its been to the dealership, they tell me crank sensor, which is BRAND NEW.
×