I need to replace the radio. I bought a replacement sterio to install and have been told this job requires a special wiring harness. And that I have to bypass the AMP in the car. Where is this AMP. best buy wants $400 to place and Install. I should be able to do this with out a problem. Help!
SOURCE: 2000 pontiac bonneville wiring harness
u can get one to use out of a srvice book at the libruary
SOURCE: Front Left Sway Bar Link
The front stabilizer shaft (sometimes called a sway bar) is mounted to
the top rear of the frame and to the lower control arm. The shaft is
attached to the frame with clamps and rubber insulators and to the
control arms with insulator links.
Try http://www.autozone.com/shopping/repairGuide.htm
SOURCE: i'm trying to install a
a radio install kit will have a diagram with it, plus the connectors you get with the kit should have writing on the wires to tell you what they are, the radio wires will have the same writing
SOURCE: need to bypass triad security system - car wont start
There are several configurations of the same security system. But one sure fire way to correct this issue is to get a bypass kit. Any shop that installs remote startups has the ability to bypass this system. Since the sytem measures the resitance of the key/lock and asociated wiring any shorting of those wires will make it very difficult to defaet without some expertise.
Sometimes the remote atart kit also includes the bypass, so you can get two for one here.
Good luck
-FW
SOURCE: 2002 Grand am gt monsoon, hook up rear aftermarket speakers
You have to test them, either should work fine (as in use either pair) if that doesn't work connect one pair at a time and listen for the difference, one pair might be for factory midrange and other for tweeter.. there are two different wiring configurations...
180 views
Usually answered in minutes!
×