Brake light stays on
Whenever
this warning light or any other stays on in the dash it is indicating
that the systems control module (or the system sensor in the case of
lights like low oil pressure, door open indicators etc.) has detected
a fault, it then disables the system (this applies to ABS,TCS, TCM,
SRS, TPMS and BCM faults and others) as long as the light is on. You
must now have the dealer hook up a special electronic diagnostic tool
and "scan" the system for the fault code that is stored for
the problem(s) Legend
of Abbreviations. ABS Anti-lock brake system. TCS Traction control
system, TCM Transmission control module, SRS Supplemental restraint
system, BCM Body control module. TPMS Tire Pressure Monitor System
If you see alternator light flashing or low battery light when alternator failing not supplying 12 to 14 volts the abs and brake will turn on i have seen that happen before.
611 views
Usually answered in minutes!
×