SOURCE: who do you reset change oil soon light on a 2009
To reset the oil monitoring system to 100% after each oil change
(approximately 7,500 miles [12,000 km] or six months) perform the
following:
1. Press and release the
SELECT/RESET button to display
“OIL LIFE XXX% HOLD RESET =
NEW”.
2. Press and hold the
SELECT/RESET button for two
seconds and release. Oil life is set to
100% and “OIL LIFE SET TO 100%”
is displayed.
Note: To change oil life 100% miles value from 7,500 miles (12,000 km)
or six months to another value, proceed to Step 3.
3. Once “OIL LIFE SET TO XXX%” is displayed, release and press the
SELECT/RESET button to change the oil life start value. Each release
and press will reduce the value by 10%.
SOURCE: ford f350 diesel engine service
changing your oil has nothing to do with a check engine light. a disconnect of the battery wont clear a code anymore.only way out is to have the code cleared with a scan tool which it will most likely come back on until you have the problem repaired
2,439 views
Usually answered in minutes!
×