At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Does anyone know if there is a recall out on Honda igniter modules? (the
igniter module that is in/near the distributor). If so, what years/models
does this recall apply to?
I recently had the igniter module replaced in my stalled 1983 Civic
wagon by my local Honda dealership. They charged me for the service.
Someone told me that his 1989 Honda had the same problem, and he said the
igniter module was a recall item, and he had his module replaced for
free by his dealership.
Is there such a recall? If so, does the recall involve my 1983 Civic
wagon?
Thanks in advance. I would appreciate a prompt response, as I haven't
payed the credit-card bill yet! :-)
Phil
Is there a recall on the ignitor for the 98 Honda Accord
The 98 Honda Accord does not show a recall for the ignitor..there is one for the ignition switch.......maybe he got those confused....As for the 83 i was unable to locate any recall records for it :( hope this helps.......Good luck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Memory Seat System Components
The memory seat system consists of the following components:
• Power Seat Switch
• Seat Horizontal Motor
• Seat Front Vertical Motor
• Seat Rear Vertical Motor
• Seat Recliner Motor
• Driver Seat Module
• Memory Seat Switch
It's not the module , probably sensor supplying bad info to the module.
Memory Set/Recall Operation
The driver seat adjuster motors are equipped with potentiometer type position sensors used by the driver seat module to determine the seat position. The position sensors are supplied with 5-volt reference and ground circuits from the driver seat module. The position sensor signal circuits are referenced from ground within the driver seat module. The signal circuit voltage levels monitored by the driver seat module range from 0.39 - 4.58 volts and are determined by the wiper locations on the resistors within the motor position sensors. The position sensor circuit voltage levels are used by the driver seat module to determine the seat position when storing or recalling memory position settings.
The memory recall switch assembly on the driver's door provides inputs to the driver door module. Battery voltage is supplied to the memory recall switch assembly from the driver door module. When a memory recall 1, 2, or EXIT switch is pressed, the switch contacts close the appropriate switch signal circuit to the battery voltage supply circuit within the memory recall switch assembly. When the driver door module receives active switch signals from the memory recall switch assembly, the appropriate commands are sent to the driver seat module using the Class 2 Serial Data circuit.
Memory seat recall operation is allowed only with the transmission selector lever in the PARK position while the ignition is on. The transmission selector lever position data is provided to the driver seat module by a message through the Class 2 Serial Data circuit.
Your best bet , take it to a qualified repair shop and have it checked for DTC'S - diagnostic trouble codes .
Install a scan tool.
Observe the switch parameter for which the DTC has set in the seat module Inputs/Outputs data list.
Does the scan tool display Inactive?
DTC B1735, B1740, B1745, B1750, B1755, B1760, B1815, or B1820
DTC B1825, B1850, B1860, B2355, B2365, or B2375
The driver seat adjuster motors are equipped with potentiometer type position sensors used by the driver seat module to determine the seat position. The position sensors are supplied with 5-volt reference and ground circuits from the driver seat module. The position sensor signal circuits are referenced from ground within the driver seat module. The signal circuit voltage levels monitored by the driver seat module range from 0.39-4.58 volts and are determined by the wiper locations on the resistors within the motor position sensors. The position sensor circuit voltage levels are used by the driver seat module to determine the seat position when storing or recalling memory position settings.
Ignition control module! It is located inside the distributor. I have a 1991 honda accord and honda had a recall on the control module. get your vin # nand call your local honda dealership and see if '99 had a recall too they will replace it free, if not mine cost $60
The 2001 windstar does not have a recall on the ABS. There is a TSB but this is just a message to help out the repairer, its not a free warranty repair. The only recall you most likely have open is the speed control recall which is not associated with the ABS concerns common to the windstar.
I'll give you a list of a few things that could be causing your problem. However, I think it's most likely a bad ignition module. I looked this up on the web and I see a lot of ignition module problems for the 2002 Escape. I checked the Ford recall list but there was no recall issued for what looks to be a very common problem with the ignition module.
Here are some other things that could be causing your problem.
1. Bad ignition coil
2. Clogged fuel filter
3. Clogged air filter
4. Clogged fuel injectors
5. Bad spark plugs, wires, distributor cap and /or rotor.
the abs module could be the problem but they also had common problem with rear speed sensor harness breaking at the connector by the front of the left rear wheel
your fuel delivery module is under recall. 10 years from the date of original purchase (by anyone) from Ford. Recall campaign 03N01. Ford will play dumb at first, it's a "silent" recall. there are more here: http://www-odi.nhtsa.dot.gov/cars/problems/recalls
hello i dont think you will need a tranny your ignition system is tied into a few different areas in your harness from what your explaining the ignition contacts cross each other creating a short,safety neutral switch mounted at tranny ,starter, wich would run thru system blowing out fusebile links that are tied into the harness most likely near your starter ,goodluck please rate
×