- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hey there i have a 1996 nissan primera 4wd auto every gears works mint as no issues its fool with gearbox oil but it wont drive in reverse what would you recommend? Would it be tge reverse sencor?
Your Nissan Primera has an on-board diagnostic computer which can detect malfunctions in either engine or transmission.
When the Engine Management light remains lit, this means some faults are present and need investigating.
From what you've described, one of the issues is indeed related to the transmission, but you will need to have the trouble codes (DTC's) extracted from your vehicle's computer, in order to determine what requires repair.
Whenever power is disconnected (i.e. the battery) and re-connected, this resets your vehicle's computer momentarily, until such time as it detects the fault again.
Recommend you either have your local dealer extract the codes (for a small 15min labor fee), or learn to extract the codes yourself, using a suitable jumper wire.
"If this has helped you in any way, please rate this solution"
hi i am not 100% sure but i think it is the P11 144 gearbox its used with the almera qg15de engine. i think it is also used in a primera and almera tino of the same years.
i have a leak on my oil filter ive justchangedit the wasnta leak before i did ive tried2 filters still the same could you tell me the correct way to fit thisits the paper filter and rubber o seal
you will have to loosen the center nut that is located on the front hub while the care is still down on the ground to make it easy to undo then jack the car up and put it on a car stand then loosen the 6 locating nuts and bolts on the gearbox flange if it dosent have the bolts and flange it requires to use 2 leavers on both sides of the iner c v joint and pop the c v out before you try to pop the c v out you must undo the bottom lower control arm so that you can move it free if you dont undo control arm it will keep the c v sold against the fron wheel hub
door handle won't work on 1992 Nissan Primera
NISSAN PRIMERA 2002HOW DO YOU REMOVE CONSOL
how do i find bolts to remove starter motor
×