20 Most Recent 1990 Chrysler LeBaron Questions & Answers

0helpful
1answer

Fuse location for convertable top motor on 1990 chrysler lebaron

If the motor works when top up is used, then it's the relay. Relay located on left side near driver's foot.
11/2/2021 2:21:00 PM • 1990 Chrysler... • Answered on Nov 02, 2021
0helpful
1answer

How to remove wheel lug studs

try to hit stud squarely and hard with a ball pein hammer to knock stud out of axle face. press the helpful button and check links below Removing wheel studs
2/6/2016 3:56:41 PM • 1990 Chrysler... • Answered on Feb 06, 2016
0helpful
1answer

Banging noise in rear when going slowly around turns or over bumps.Behind drivers seat.

Hi Chris: Check the back springs.
7/12/2015 3:37:41 AM • 1990 Chrysler... • Answered on Jul 12, 2015
0helpful
2answers

I push on the cluster and the signals start working

bad ground,take off cluster and clean contacts
4/17/2015 12:52:20 AM • 1990 Chrysler... • Answered on Apr 17, 2015
0helpful
2answers

Chrysler LeBaron starts only in neutral after about three or four times after turning the key,the car has a new battery in it and i cleaned the terminals

get rid of it. chryslers are junk cars that starts with one problem and then back to back.
3/24/2015 1:51:22 PM • 1990 Chrysler... • Answered on Mar 24, 2015
0helpful
1answer
0helpful
2answers

While driving pressing the gas pedal down car loses complete power and does not accelerate pressing the gas pedal lightly will gain some speed only to a certain point then pressing any harder car will

An easy thing to check first is your air filter. If it is clogged, it can cause that problem. I speak from experience. Had the exact same thing happen with an '85 Oldsmobile.
12/22/2014 3:31:41 AM • 1990 Chrysler... • Answered on Dec 22, 2014
0helpful
1answer

Where is the egr vacuum hose located in a 1990

On the egr valve !
10/2/2014 12:50:17 AM • 1990 Chrysler... • Answered on Oct 02, 2014
0helpful
1answer

My heater blower, power windows, and rear defroster stopped working at the same time.

Hi Amy, I'm glad to help! Amy, this is a tough one, because without running tests its hard to find wiring issues. It sound like you have lost either power or ground somewhere in the system where all of these components come together and or related to one another. I would check for a connector where all of these components go through and see if there is power and ground at that connector and the power and ground comes out the other side of the connector. Give me a call if your in the Saint Peters or St Charles Mo area. Allen 314-374-5218. Hope this helps and have an awesome day Amy.
8/25/2014 11:38:05 AM • 1990 Chrysler... • Answered on Aug 25, 2014
0helpful
1answer

High beams only work but looks like all bulbs are good, could it be the fuse?

On some vehicles there is a fuse for low and high beam head lights. If bulbs are ok, I would check for a blown fuse! or relay.
8/7/2014 3:12:28 PM • 1990 Chrysler... • Answered on Aug 07, 2014
0answers
0helpful
1answer

1990 chrysler convertible quit while driving. Checked for gas flow, good checked for spark from coil, none. Replaced coil, still no spark, is there an ignition fuse that could cause the problem?

I am assuming this is the Lebaron model and you have the 2.5 or 3.0 engine, right ? Do you have power going to the coil, and a ground signal coming from the distributor ? Did you check the asd relay ?
2/19/2014 7:49:14 PM • 1990 Chrysler... • Answered on Feb 19, 2014
Not finding what you are looking for?
1990 Chrysler LeBaron Logo

140 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LeBaron Chrysler

  • LeBaron Chrysler

Most Popular Question

chrysler lebaron 1990 convertible wiring

  • Cars & Trucks
Loading...