20 Most Recent
1994 Chrysler LeBaron Questions & Answers
How to reset car alarm
Put the key in to start it... Mine reset when disconnecting battery and that's what I did...If not idk
I raised my top now when I hit the switch to lower
first thing id do is to ceck the fuse. i know the switch checked out but thats the simlist solution. if its good then there are 2 motors on either side of the convertable top at the bottom. they might be hard to find but they will be behind some panels. just follow the top down and find which panels to remove. id say your motors are bad. i know it sounds weird that both could go out at the same time but i used to build convertable tops for the mitsubish spyders and ive seen them go bad after just 1 month. id unplug one of the motors and try to jump the connection to see if they are bad. if they are both in working order after that then id say you ave bad wiring somewhere from the switch.
Speedometer does not work. Replaced speed sensor, same results.
It's probably the gauge it self that is bad , they do go bad . Does the vehicle run an shift good ? The vehicle speed sensor is an input to the transmission control module (computer) an the TCM is on the CCD data bus , so are other modules . Like the ECM - engine computer an what ever other modules your vehicle has . The TCM shares speed info with ECM , instrument cluster etc... So if the transmission shifts good an engine runs ok the VSS is good .
How do I get the interior lights to go out
A switch somewhere is damaged. there's one on the door jam (where hinges are) but it can also be a short somewhere.
What I did is pull the bulbs out and bought one of those keychain flashlights and leave it on my seat as I only need a little light to see the keyhole. Most of the time I don't need any light as the street lights or the moon provide enough of it.
Not finding what you are looking for?