20 Most Recent 1999 Mitsubishi Mirage - Page 2 Questions & Answers

The spark plugs may have become oil fouled. Nothing to worry about. Just replace the spark plugs, start the engine and let it idle for 10 minutes.

Has the battery been load tested, the voltage means nothing in many cases.

Check the obvious. Shift to park (also try neutral) If you jump from the battery to the starter directly if it turns then you may need to replace the solenoid. It may also be an ignition that needs to be replaced.

What is your question

Cirket braker meens fuse you will have to replace first then try to start again.

How do I fix an accelerator pedal position sensor on my 1999 Mitsubishi Mirage?

Contact the car dealer parts department or any auto parts store.

Hi there,Your vehicle incorporates an on-board diagnostic (OBD) computer, which monitors behaviour of your vehicle's engine and ommission related cicruits.This sounds like an electrical issue (I suspect perhaps your Throttle Position Sensor - TPS, or similar circuit). Your OBD computer will have stored the appropriate code/s causing this condition. Have your codes read by an approved Mitsubishi Agent, who will then be able to advise what will be required to fix this issue.Having your codes read should ALWAYS be the first step, as this will save you $'s and time, elimination the need to purchase unnecessary parts.Hope this helps,ScottPS: if this advice has helped you in any way, please rate this solution

How is it not working ?No air blowing thru the vents ?Air not cold ?Is the compressor running ?

have you tryed looking on youtube as there usually some really helpful steps that you should take but it can be a bit of a faff on trying to find what you want sometimes