Why does my Panasonic KX-TGM420 go straight to voice mail?
Voicemail is a service of your telephone company. If your calls are going to voicemail, check the settings following the directions for the service. If the answering system is getting the calls, then check if the KX-TGM420 handset(s) and base are set to a ringer volume of 0. You can change this from either the base or a handset by pressing the + button while the phone is ringing. Otherwise, when the phone system is in standby (no calls in or out), press # 1 6 0 on a handset or * # 1 6 0 on the base. Then set the ringer volume on the handset (0-6) or base (0-10). This is the equivalent of pressing menu and navigating through the menu (Menu > Settings > Ringer Adjustment > Ringer Volume (Incoming)). You can also turn off the ringer by pressing and holding 0 on the handset and Ringer Off on the base. See pages 33 and 44 of the manual, link below.
I hope this helps. The manual is available here: https://help.panasonic.ca/viewing/ALL/KX-TGM420/OI/TGM420_PNQX7794YA/TGM420_PNQX7794YA.pdf .
Cindy Wells
Panasonic KX-T7433 CO Not Assigned Error
The "CO Not Assigned" error on your Panasonic KX-T7433 handset indicates that the Central Office (CO) line has not been properly assigned to the handset. Since you've mentioned that other handsets in your office can connect to CO-01 without any issues, the problem seems to be specific to certain handsets. Here are a few steps you can take to troubleshoot and potentially resolve this issue:
- Restart the Handset: Sometimes, a simple restart can resolve temporary glitches. Try unplugging the handset's power cord for a few seconds and then plugging it back in.
- Check CO Assignment: Double-check the CO assignment settings on the problematic handsets. Make sure that the CO-01 line is correctly assigned to those handsets. Follow these steps:
- Press the "Program" button on the handset.
- Dial 1 (CO Line Access).
- Dial the line number you want to assign (in your case, 01).
- Press the "Auto Dial/Store" button to save the assignment.
- Hang up the handset.
- Reset the Handset: If reassignment doesn't work, you can try resetting the handset to its default settings. Keep in mind that this will erase any customized settings on the handset. To perform a reset:
- Make sure the handset is not in use.
- Press and hold the "Program" button while you reconnect the power cord.
- Keep holding the "Program" button until the handset displays "Initializing..." and then release the button.
- The handset will restart and return to its default settings. You'll need to reconfigure any personalized settings afterward.
- Firmware Update: Check if there are any firmware updates available for the Panasonic KX-T7433 system. Outdated firmware can sometimes cause compatibility issues. Refer to the user manual or Panasonic's official website for instructions on updating the firmware.
- Contact Panasonic Support: If none of the above steps resolve the issue, it might be best to contact Panasonic's customer support. They can provide specific guidance based on your model and system setup.
- Physical Check: Ensure that the physical connections and cables related to the CO-01 line are secure and functioning properly. A loose connection could lead to communication problems.
Keep in mind that these steps are general suggestions and may need to be adjusted based on the specific model of your phone system and any unique configurations in your office. If you're not comfortable performing these steps yourself, it's recommended to seek assistance from a professional technician or the manufacturer's support team.
Panasonic 42x5 stuck in selfcheck mode
Official website of Panasonic (
Panasonic - Troubleshooting - The television is frozen / locked up.) tells the following procedure:-
Plasma TV
Try the following to restore the television operation.
- Unplug the television from the electric outlet for 1 minute. Plug back in and test.
- Unplug the television from the electric outlet for 1 minute. Unplug all external devices connected to the television. Plug the television back in to the electrical outlet (with no external devices connected. and test. If the television now operates, you may have a problem with one of the external devices. Plug the devices back in one at a time to determine the source of the problem.
- Reset the television.
- The reset is not for models: CX400, CX420, AS530, GT30, ST60 and PX60 series.
To Reset by buttons on TV and Remote.
- Television power should be on.
- Hold [VOL - ] ON TELEVISION & [MENU] ON REMOTE for more than five seconds.
- To exit - disconnect the AC line
9/22/2023 3:34:55 AM •
Panasonic...
•
31 views • 0 helpful votes
SA AK27 panasonic system?
If you use a 3.5mm jack to whatever the type of sockets on your set are called Aux in. Probably Phono or RCA sockets.
Set your Panasonic to AUX, volume at about 1/4, play your laptop with the lead connected from your output socket on the laptop. Adjusy the volume to suit your requirements.
Panasonic kx-T7633 with Pbx-DAT50 goes dead
- By unplugging and then replugging the power cable, try performing an easy reboot of the phone.
- Make that the phone is securely attached to a power source and that the power supply is operating as anticipated.
- Ensure that the cables linking the phone and the PBX-DAT50 system are firmly connected on both ends. If there are any damaged or incorrectly attached cables, it can result in problems with connectivity.
8/11/2023 8:57:50 PM •
Panasonic...
•
42 views • 0 helpful votes
Buenas tengon un tv Panasonic plasma th-42px80u y no tengo pesente los 187 y 130 voltios de la placa fuente. Donde pudiera ser el problema?
If you're not getting the expected voltages (187V and 130V) from the source board of your Panasonic TH-42PX80U plasma TV, there could be several potential reasons for this issue. Here are some steps you can take to troubleshoot the problem:
- Check Power Outlet and Cable: Ensure that the power outlet you're using is functional and providing the correct voltage. Also, make sure the power cable connecting your TV to the outlet is in good condition and properly plugged in.
- Inspect the Source Board: The source board is responsible for providing power to various components of the TV. Inspect the board for any visible signs of damage, such as burnt components, bulging capacitors, or loose connections.
- Check Fuses: The source board might have fuses that protect against voltage irregularities. Check if any of these fuses have blown, and if they have, replace them with fuses of the same type and rating.
- Voltage Regulator Components: The source board contains components like voltage regulators that regulate the voltage to different parts of the TV. If a voltage regulator has failed, it could result in the incorrect voltage output. Check for any damaged or overheated voltage regulator components.
- Power Supply Unit (PSU): The power supply unit is a common culprit for voltage-related issues. It's responsible for converting incoming power to the various voltages needed by the TV's components. If the PSU is faulty, it could lead to voltage problems. Consider inspecting or replacing the power supply unit.
- Test Components: If you have the necessary skills and equipment, you can test individual components on the source board using a multimeter. This can help identify faulty components that might be causing the voltage issues.
- Consult a Professional: If you're not comfortable performing these tasks yourself, or if you're unable to diagnose and fix the issue, it's recommended to consult a professional TV repair technician. They have the expertise and tools needed to diagnose and repair complex electronic issues.
Remember, working with electronics can be dangerous, especially if you're not familiar with the proper safety procedures. If you're unsure about any step, it's best to seek professional assistance to avoid personal injury or further damage to your TV.
7/25/2023 2:06:15 PM •
Panasonic...
•
58 views • 0 helpful votes
Not finding what you are looking for?