Nikon LS - Recent Questions, Troubleshooting & Support - Page 4
My scanner is not being recognized by my PC. I
try right clicking on the unit , click on properties, click on compatibility, tick box click on win xp, apply and ok
next click on details , drivers , update drivers
it will be a communication problem that has occurred in the programs between the scanner and the winxp operatibg system
Camera going into standby
If you mean that the power save time is very short. you can edit it at the properties of scanner.
But if you mean that the camera stop like hang after scan the first picture it may be from USB Cable or you have more than one installed driver on your PC & there is a conflict between it.
Windows 7 64 bit drivers
I use the same scanner. I heard Nikon was working on compatibilty with windows 7. They done it for vista but 32bit only. I would recommmend using Silverfast software. They have the comp. drivers for 32 and 64 bit windows 7. But it comes with a someone hefty price. I just looked on there site and its $398.00. It is a good software but pricey.
Nikon coolscan 5000ed, film stuck, will not eject
If you switch off the scanner you should then be able to remove the grey film holder, even though the film strip will still be inside. Then, press the small button above the film entry slit to open the front of the holder. Pull up the top cover, ease the bright metal holder strip forward then lift the metal flap that holds down the film strip. At this point you should be able to remove the film strip. Re=assemble and try again.
Good luck.
How do I remove the photo cartridge from the camera
Removing Memory Cards
Before removing memory cards, turn the camera off
and confirm that the power-on lamp and monitor are
off. Open the battery-chamber/memory card slot cover
and press the card in to partially eject the card. The
card can then be removed by hand. Do not attempt to
remove the card at an angle.
AUTOREFRACTOR
White screen is a video card problem.Maybe your device is working with a full memory, and have to be cleaned.I need more informations in
[email protected]
Not finding what you are looking for?