NEC ND - Answered Questions & Fixed Issues

well try to burn the music using the nero software

You can free download Daniusoft DVD Audio Ripper to rip audio separated from dvd for ipod and other players.
http://www.daniusoft.com/dvd-to-audio.html

i experience to your problem, this your burning a VOB is very fine but it your going to open at the same dvd burner you cannot see the files inside and also if you play that to your dvd-player,.. you know this type of burning speed is the matter, maybe you burn at maximum, keep burning your files at low speed for recognizing its buffer in good result..

Does it write data OK but not scribe?? Possibly it's just dusty after years of sitting. Get a foam swab or long q tip and wet with alcohol a little, and clean off the laser lens inside. Carefully. Or use one of those disk-based cleaner thingies.

You can download NEC Driver from this site.

• NEC DVD Driver

>>http://drivers.softpedia.com/get/FIRMWARE/Nec/NEC-ND-3530A-AG.shtml<<

go to help and support restore your computer to the day it went wrong

Never heard of DVD drive using a com port. Either USB or IDE/Sata. There is nothing to set.

click start control panel administrive tools computer management then select event viewer depending on what operating sytem you have this may vary in left panel extend the events there you will see errors in red right panel you will no what exactly what the error was and at what time it occured you might be able to work your way through the problem until you know what type of error it is you cant find a fix for the problem also you might try Click start control panel administrive tools,computer management,device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click you will have options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone. oryou might have to physically unplug the leads for this cd/dvd then plug them back this should activate the found new hardware wizard or you might have to uninstall then restart your computer then reinstall your DVD/CD then reinstall the driver for this device if your computer came with a motherboard disk the drivers could be on it click start control panel administrive tools computer management device manager scroll down cd dvdrom drives if you see a yellow question or exclamation mark? ! or a red x right click you will need to update the driver or select properties general troubleshoot, select driver click to reinstall drivers click update driver hope this helps you

Hi,
There could be a lot of reasons why your drive is not working properly. It could be that there is a service from your burning software that is not running properly thus affecting the CD-ROM. If you have any of these software, try un-installing them.
You can also try this for an automated fix from microsoft.
http://support.microsoft.com/gp/cd_dvd_drive_problems
Read and follow the instructions.


Hope this helps.

You need a driver for the soundcard that is in this PC (onboard audio?) Sometimes the setup will think it has the right card, and loads drivers, but it won't work. You need to look at the Motherboard if you have onboard and you should see VIA or some other chip pretty far away from the processor. The most common onboard audio is AC97, but a lot use CMedia and the drivers are not interchangeable. One way to try this is to go into device manager, hardware, and double click in Audio devices and find the soundcard. Right click, select properties, and hit uninstall. Then click scan and see what happens when it puts it back in. Remember to always reboot and you might get some sound. It sounds really lame, but when you put a new driver in a lot of Windows PCs will mute all sound and you have to go to Volume Control to get rid of it. I hope these ideas give you some things to try.

It;s possible that you may have left the disc open or re-writable. Check this first.
The settings will be located in the software you used to burn the disc. Easiest would be to start a new burn session and read the available settings throughout the window prompts. It may also be located in advanced settings, if you don't find it this way.

if you mean that the dvd is not installed
you might have to physically unplug the leads for this cd/dvd rw then plug them back in or you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device click start control panel administrive tools computer management device manager scroll down cd dvd rom drives if you see a yellow question mark? right click you will have options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall Click start control panel administrive tools,computer management,device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click you will have options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone. Hope this helps

make sure that the dvd rw is getting enough power test all leads that are attached to the dvd rw including electrical extensions and make sure they have a secure connection or just replace them there might be bad/faulty your drivers may have been corrupted or you might have a virus run your antivrus program you might have to physically unplug the leads for this cd/dvd burner then plug them back in this should activate the found new hardware wizard or you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device click start control panel administrive tools,computer management,device manager scroll down cd dvd rom drives right click you can you can update driver roll back driver or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall Click start control panel administrive tools,computer management,device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click you will have options update driver roll back driver or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer Close all open programs Click Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.hope this helps

make sure that the cd rom is getting enough consistent power test all leads that are attached to the cd rom including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or your drivers may have been corrupted or you might have a virus run your antivrus program you might have to physically unplug the leads for this cd rom then plug them back in this will activate found new hardware wizard hope this helps or you might have to uninstall then reinstall your cd rom or uninstall the driver then reinstall for this device also control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives right click you can you can update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall only do the registry check if you cant see the drive/s in windows explorer/my computer or it might be a registry problem Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose Delete After deleting the keys, close the registry editor Reboot your computer Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone. hope this helps

There are DVD+R discs and DVD-R discs. It looks as though your burner will only write to the "+R" discs. I believe that is your problem. Try the +R discs which can be purchased individually or in 3 packs just to be sure. Good Luck.

It sounds like the DVD write laser isn't firing properly. This is usually a different laser than the read laser.
Have you tried DVD+R vs DVD-R blanks?

you could get this on Ebay if you dont have an account you will need to create one Add Email adress Add Bank Acc Add Credit Card also add your postal adress also add a paypal account when you get to the paypal login page at the bottom you will see new to paypal sign up tab paypal to create an account paypal registration password ,bank card /credit card,phone numbers home/mobile ,email adress and a postal adress be very specific when you type in the search always ask questions? before you make a purchase and keep the email/s for security reasons if the item arrives and its not as described you will even see the pictures of your item so you cant make a mistake and get them home delivered hope this helps

make sure that the dvd burner is getting enough power test all leads that are attached to the dvd burner including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or the drivers may have been corrupted or you might have a virus run your antivrus program you might have to physically unplug the leads for this cd/dvd burner then plug them back in this should activate the found new hardware wizard or you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device Click start control panel administrive tools,computer management,device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click you will have options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.hope this helps

make sure that the dvd burner is getting enough power test all leads that are attached to the dvd burner including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or the drivers may have been corrupted or you might have a virus run your antivrus program you might have to physically unplug the leads for this cd/dvd burner then plug them back in this should activate the found new hardware wizard or you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device Click start control panel administrive tools,computer management,device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click you will have options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall hope this helps