Lutron Televison & Video - Popular Questions, Answers, Tips & Manuals

No. A remote must be able to learn IR codes or already have the Lutron codes installed.

No, the MIR-600 uses line-of-sight infrared as its communication technology. Homelink works with radio frequency wireless technologies. The two are incompatible.

Unfortunately, there's not a lot of black magic involved here. 99.9% chance is that the product is either wired incorrectly or that it failed during the installation or uninstallation (which is likely if either took place while power was still on).

It may be too late given the date of this post, but the buzzing has nothing to do with the bulbs (usually, dimmers and lamp buzzing are a common problem which is why you probably got the suggestion), but in your case, you have radio-frequency interference from the dimming circuit leaking into the audio circuit. The best things you can do is either minimize the RFI, or separate the audio circuit away from the dimming circuit. Based on what you're saying about the PC input, it sounds like the main culprit is that specific audio wire going between the PC and the sound system - can it be run differently so that its further away from the dimmer/circuit. Are the PC and the dimmer on the same breaker? - If so, maybe noise is radiating from the dimmer into the PC through the power wiring - putting on different breakers could help.
One more note, the best dimmers, in terms of RFI performance, are reverse-phase control dimmers (usually designed for electronic-low-voltage... and be careful because they often get confused with magnetic low-voltage... and those will not help. Without going into too many specifics, the ELV dimmers have a much softer on/off/on/off dimming cycle when compared to standard incandescent dimmers (this is a circuitry thing with a much more complicated explanation), but as a result, they tend to have significantly fewer issues with RFI. They can be an expensive solution for simple problem solving, but the MIRELV-600 should do the trick (again, don't be fooled, the MIRLV-600 is the magnetic low-voltage product, and for what you're doing, won't help).

Is there another one in the house? The best thing you can do is to first figure out if the issue is with the remote or with the MIR-600. (use one remote on that dimmer, another dimmer - than a second remote on that dimmer, and another dimmer - does the issue stay with the dimmer or the remote)? Regardless, there tech support center can help you out pretty effectively at 1-800-523-9466

Your issue is pretty vague. Their technical support center can help you diagnose very effectively - 1-800-523-9466

The axles may have substantial amount of in/out play, 1/4 inch or more. Does the axle in question actually drive the wheel or does it freewheel?It's a typical differential so if you get both wheels off the ground and spin one wheel, the other wheel should rotate in the opposite direction.The axles are retained by the differential assembly (inside transmission) so if the axle is truly falling out, to fix it will require transmission be removed and opened. Probably not an economical repair unless you can DIY or replace with good used unit.

Check the internet connection. The television can't update if it can't see the internet. Resetting it breaks the previous settings. Just for fun, reboot the router as well and wait 15 minutes until all the lights come back on. Then reestablish the television connection to the router. Harwa is not a make we know here in North America. https://www.google.com/search?q=Harwa+Smart+television.+How+to+restore+Apps ..

Hello ! It sounds like you are experiencing some issues with your TCL TV. It's great that the backlight lights are working fine. The blinking *********** light and white screen definitely indicate a problem. One possible issue could be with the internal circuitry or the display panel itself. It's best to contact TCL support or a professional technician to diagnose and fix the problem. In the meantime, you can try power cycling the TV by unplugging it for a few minutes and then plugging it back in. As for uploading a video, you can try connecting your device to a computer and transferring the video file that way. Alternatively, you can upload the video to a platform like YouTube and share the link for others to view. I hope this helps!

Put the batteries back in and aim the front ot the remote at the front facing selfie camera on a smartphone. Press a button and you should see a flash. If no flash, the remote has failed. If there is a flash, the television IR module or main board has failed.

Telefunken Replacement TV Remote TLED-26FHDPA

Soundtech https://soundtech.co.za > telefunken-replacement-tv-rem... Telefunken replacement remote compatible with TV models: TLCD-29FHDP TLCD-32FHDA TLCD-32HDA TLCD-37FDHA TLCD-37FHDA TLCD-39FHDP TLCD-40FHDC TLED-26FHDPA ZAR 199.00 ..

Sorry, but we do not supply parts. This is a website for advice on repairing items. You could try contacting the store you bought it from or contacting iheater directly.

Question edited for clarity. Question moved from Car Audio category. Help in the link https://www.google.com/search?q=Ecco+32+inch+smart+tv+lh32+is+showing+red%2C+blue%2C+green%2C+white+and+grey+simultaneously+when+I+turn+it+on ..

Press the red button again to toggle off.

It appears that there could be miscommunication. As of my previous update in January 2022, Matertech doesn't seem to be a commonly known term or corporation. On the other hand, if you're talking about "Google," it's a well-known worldwide technological corporation that specializes in internet-related services and goods, such as search engines, cloud computing, online advertising technologies, software, and hardware. Google's official website or an internet search utilizing one of the search engines like Google itself are usually the easiest ways to get information about Google. If "Matertech" relates to a particular thing or idea, further information could be helpful in order to provide a more precise answer.

They are not a good brand, made in China and only sold in South Africa. In Canadian money they are just over a hundred dollars new. If you have had it longer than 2 years, it is cost effective to just buy a new one. https://www.google.com/search?q=condere+32+inch+smart+tv+reset+to+factory+settings ..

Unfortunately you will have to purchase a remote control for it. All menu systems are within the setup display, all of which are controlled with the remote.They may be available on eBay.Andrew found the link.

Don't use Universal Remotes. $20 for a facsimile copy of the original. No programming. https://www.google.com/search?q=harwa+tv+model+hw-32l1+remote+control https://www.google.com/search?q=harwa+tv+model+hw-32l1+remote+control Harwa Codes https://www.eliztech.com/remotes/codelists/harwa-tv-codes-for-ofa ..

1. Turn on your Smart TV: Ensure your Sinotec TV is powered on and connected to the internet.
2. Navigate to the App Store: Look for an app store or marketplace on your TV's home screen. It might be called something like "App Store," "Google Play Store," or "Smart Hub."
3. Search for Showmax: Use the search function within the app store to search for the Showmax app. You can usually find this by typing "Showmax" into the search bar using your TV remote.
4. Select and Install the Showmax App: Once you've located the Showmax app in the app store search results, select it, and then choose the option to install or download it to your TV.
5. Open the Showmax App: After the installation is complete, navigate back to your TV's home screen and locate the Showmax app icon. Select it to open the app.
6. Sign In or Sign Up: If you already have a Showmax account, sign in using your credentials. If not, you may need to sign up for a Showmax account using your email address and creating a password.
7. Start Watching: Once you're signed in, you should be able to start browsing and watching content on Showmax.
8. Hope this helps

Gentle Cleaning: Unplug the radio and remove any batteries if applicable. Dampen a soft cloth with warm water (you can add a small amount of mild soap if needed). Wipe down the sticky areas on the cover gently. Avoid using excessive force or abrasive materials. Dry the cover thoroughly with a clean, dry cloth. Sticky Residue Removal: If the stickiness persists, you can try using isopropyl alcohol (rubbing alcohol) or white vinegar. Dampen a cloth with either alcohol or vinegar. Gently rub the sticky spots on the cover. Wipe off any residue with a clean, dry cloth. Avoid Harsh Chemicals

Try cleaning behind them with electronics switch cleaner spray, but it may be the whole module is faulty. https://www.google.com/search?q=jvc+kw+av50+volume+button+not+working ..