My lg gas dryer model no dlg3744w will not heat
There are three high limit thermostats. Check all three for continuity. They should read closed (0 ohms). Check the flame sensor. They're cheap so you could just replace. It needs to close before the first solenoid opens and then open before the second solenoid opens. Again, easier to replace. Check continuity on the solenoid coils. They should read 1.5 K ohms. I replaced two gas valves before I recognized a "new" gas valve might not be really new.
7/21/2014 7:35:02 PM •
LG Home...
•
Answered
on Jul 21, 2014
•
419 views
Need to remove front panel of dle0442w to get to heat limit switch
unplug the dryer,remove the top panel,remove the control panel,usually a couple of screws on the top right and left side,when you get the control panel off there are like 4 screws on the top front panel then open the door and remove 2 more screws,disconnect door switch.go here this will help you out i'm trying to go by memory and it's harder to remember how to do it,when i'm in front of it i can pull it apart no problem but this should help you out.http://www.youtube.com/watch?v=RvbJn61d9hQ
11/8/2013 11:24:40 PM •
LG Home...
•
Answered
on Nov 08, 2013
•
430 views
Dryer not heating
Hello KrazyIf your dryer tumbles, but there is no heat. You need to check this following:Check for proper air flowTest the safety fuseTest the thermostatsTest the centrifugal switchTest the timer motorTest the heating elementBest RegardsNeciforo Llanto
10/2/2013 8:49:12 AM •
LG Home...
•
Answered
on Oct 02, 2013
•
191 views
Does a dryer have areset button
Generally speaking no. It might be the control board or the power supply or the control panel that is bad. You can take the top off and there should be a set of technician instructions that say what to test.
6/19/2013 3:24:11 AM •
LG Home...
•
Answered
on Jun 19, 2013
•
142 views
How to reset the check filter message
OK, you will need to replace the center post seals. The parts are less than $10.00 but you will need a special tool to get the basket out. Let me know if you want to tackle this job yourself and I will direct you to the parts and the tool and a video to walk you thru the repair. A service call for this will be anywhere from $100.00 to $150.00. Keep me posted!
11/26/2012 10:37:55 PM •
LG Home...
•
Answered
on Nov 26, 2012
•
220 views
Electrical burning smell
with any kind of electrical burning smell you should call a technician. The smell could be generated from either the control panel being shorted or the motor itself overheating and burning the one of the windings out. If you need further help, I’m available over the phone at
https://www.6ya.com/expert/jason_4570d45317834dd3
9/6/2012 1:19:53 PM •
LG Home...
•
Answered
on Sep 06, 2012
•
433 views
Not finding what you are looking for?