LG Home Applaince Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 16 Products
  • 17 Answers
  • 1K Views

There is a switch inside the unit that stops it when the belt breaks or comes loose. Check that.

LG Home... | Answered on Mar 15, 2017


check drum belt, safety fuses and door switch..

LG Home... | Answered on Feb 03, 2015


There are three high limit thermostats. Check all three for continuity. They should read closed (0 ohms). Check the flame sensor. They're cheap so you could just replace. It needs to close before the first solenoid opens and then open before the second solenoid opens. Again, easier to replace. Check continuity on the solenoid coils. They should read 1.5 K ohms. I replaced two gas valves before I recognized a "new" gas valve might not be really new.

LG Home... | Answered on Jul 21, 2014


Make sure it has good air flow

LG Home... | Answered on Nov 25, 2013


unplug the dryer,remove the top panel,remove the control panel,usually a couple of screws on the top right and left side,when you get the control panel off there are like 4 screws on the top front panel then open the door and remove 2 more screws,disconnect door switch.go here this will help you out i'm trying to go by memory and it's harder to remember how to do it,when i'm in front of it i can pull it apart no problem but this should help you out.
http://www.youtube.com/watch?v=RvbJn61d9hQ

LG Home... | Answered on Nov 08, 2013


Hello Krazy

If your dryer tumbles, but there is no heat. You need to check this following:
Check for proper air flow
Test the safety fuse
Test the thermostats
Test the centrifugal switch
Test the timer motor
Test the heating element

Best Regards
Neciforo Llanto

LG Home... | Answered on Oct 02, 2013


Generally speaking no. It might be the control board or the power supply or the control panel that is bad. You can take the top off and there should be a set of technician instructions that say what to test.

LG Home... | Answered on Jun 19, 2013


the usual cost is about $500 - $600 if you call A&E FACTORY SERVICE

$700 - 1.000.00 if you call Appliance Unlimited

I thank you should get a all new unit instead of fixing it

LG Home... | Answered on Jan 10, 2013


OK, you will need to replace the center post seals. The parts are less than $10.00 but you will need a special tool to get the basket out. Let me know if you want to tackle this job yourself and I will direct you to the parts and the tool and a video to walk you thru the repair. A service call for this will be anywhere from $100.00 to $150.00. Keep me posted!

LG Home... | Answered on Nov 26, 2012


The windings in the motor are bad and the motor will need to be replaced. Here is the motor to order.

The part comes with a 365 day, any part, any reason return policy.

LG Home... | Answered on Nov 18, 2012


Lot of these dryer had a split or defect in the drum. They will give a free drum but ya gotta pay labor to replace it.

MY LG dryer service manuals and repair videos


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

LG Home... | Answered on Nov 16, 2012


Check all the internal and external duct work for lint buildup and blockage.

LG Home... | Answered on Nov 09, 2012


with any kind of electrical burning smell you should call a technician. The smell could be generated from either the control panel being shorted or the motor itself overheating and burning the one of the windings out.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3

LG Home... | Answered on Sep 06, 2012

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top LG Home Applaince Experts

Sal De

Level 3 Expert

2699 Answers

Brad Brown

Level 3 Expert

18002 Answers

Jorge Rendon
Jorge Rendon

Level 3 Expert

5360 Answers

Are you a LG Home Applaince Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...